GHK Basic. Who has it?

Is it the same thing as GHK raw powder?
 
Floki575 said:
Is it the same thing as GHK raw powder?
Click to expand...
No. GHK basic is white (copper free) lyophilized powder to be reconned for injection. It doesn't sting like the GHK-Cu for injection.

The raw GHK-Cu powder is sold in tubes usually and has copper, is relatively loose, and is for topical use, like by mixing into a moisturizer.
 
Last edited:
Thanks. I don't know Biostrategix. Will take a look.

Yes, PGB has from time to time. 🙂 Love them!
 
RadicalCrimson said:
PGB has 50mg kits from time to time, Biostrategix (web site) has it in 100mg single vials or half-kits.
I’ve used the latter with no issues, and bought some of the former, but haven’t used it yet.
Click to expand...
Oh good Lord....Biostrategix is outrageously priced. $200 for half kit? And they're selling a single GHK-Cu VIAL for the price of a kit.
 
HereKittyKitty said:
I'm on the lookout for GHK Basic. Most suppliers don't offer it. Of those I've seen who do, it's out of stock/unavailable.

Anyone see or buy it recently?

Thanks.
Click to expand...

If you are looking for GHK-basic to mix with GHK-Cu to reduce injection pain, I suggest mixing in (in the vial or even the syringe) a little BPC-157.

The main reason for pain during GHK-Cu injection is the presence of excess copper during the manufacturing process. This excess free copper (i.e., not bound to the peptide) is one, if not the major, of the reasons for post-injection pain.

BPC-157 has a glycine amino acid residue in its structure. Glycine readily combines with free copper. The same happens with the amino acid lysine (pH-dependent), but not as readily as glycine.

I mix 2mg of GHK-Cu with 0.5mg of BPC-157 in the syringe. Simply put both substances in the syringe, pull the plunger down to let air in, turn the syringe upside down and tap lightly so that the air bubble mixes them. After mixing, remove the air from the syringe and inject. I have never in my life experienced pain (neither during nor after) from injecting GHK-Cu.

This is just a suggestion.
 
Last edited:
Lyophilized said:
If you are looking for GHK-basic to mix with GHK-Cu to reduce injection pain, I suggest mixing in (in the vial or even the syringe) a little BPC-157.

The main reason for pain during GHK-Cu injection is the presence of excess copper during the manufacturing process. This excess free copper (i.e., not bound to the peptide) is one of the reasons for post-injection pain.

BPC-157 has a glycine amino acid residue in its structure. Glycine readily combines with free copper. The same happens with the amino acid lysine (pH-dependent), but not as readily as glycine.

I mix 2mg of GHK-Cu with 0.5mg of BPC-157 in the syringe. Simply put both substances in the syringe, pull the plunger down to let air in, turn the syringe upside down and tap lightly so that the air bubble mixes them. After mixing, remove the air from the syringe and inject. I have never in my life experienced pain (neither during nor after) from injecting GHK-Cu.

This is just a suggestion.
Click to expand...
But isn't it safer and more effective to use GHK basic to absorb the copper from GHK-Cu?
 
But..if you still want GHK-basic, not for the reason of my previous post,
Calm Logic said:
But isn't it safer and more effective to use GHK basic to absorb the copper from GHK-Cu?
Click to expand...
If the reason is copper binding to remove the pain, then BPC157 is suitable and safe and very effective

If for some reason you cannot use BPC157, then yes, GHK Basic is the best option.

I have a list of vendors, but I don't know if I can post the link here... I don't want to violate the forum rules...
 
Lyophilized said:
BPC-157 has a glycine amino acid residue in its structure. Glycine readily combines with free copper. The same happens with the amino acid lysine (pH-dependent), but not as readily as glycine
Click to expand...

When i mention the Lysine amino acid, i was thinking about the use of KPV peptide for the same reason...instead the use of BPC157. So KPV may also be a solution for the post-injection pain
 
Lyophilized said:
When i mention the Lysine amino acid, i was thinking about the use of KPV peptide for the same reason...instead the use of BPC157. So KPV may also be a solution for the post-injection pain
Click to expand...
I've seen many reports of mixing KPV and GHK-Cu to avoid any ISR's and plan to use it this way when my GHK-Cu arrives.
 
Lyophilized said:
If you are looking for GHK-basic to mix with GHK-Cu to reduce injection pain, I suggest mixing in (in the vial or even the syringe) a little BPC-157.

The main reason for pain during GHK-Cu injection is the presence of excess copper during the manufacturing process. This excess free copper (i.e., not bound to the peptide) is one, if not the major, of the reasons for post-injection pain.

BPC-157 has a glycine amino acid residue in its structure. Glycine readily combines with free copper. The same happens with the amino acid lysine (pH-dependent), but not as readily as glycine.

I mix 2mg of GHK-Cu with 0.5mg of BPC-157 in the syringe. Simply put both substances in the syringe, pull the plunger down to let air in, turn the syringe upside down and tap lightly so that the air bubble mixes them. After mixing, remove the air from the syringe and inject. I have never in my life experienced pain (neither during nor after) from injecting GHK-Cu.

This is just a suggestion.
Click to expand...
Thank you. I am fine with the GHK-Cu as is. No ISR. That's not why I am looking for Basic.
 
Lyophilized said:
But..if you still want GHK-basic, not for the reason of my previous post,

If the reason is copper binding to remove the pain, then BPC157 is suitable and safe and very effective

If for some reason you cannot use BPC157, then yes, GHK Basic is the best option.

I have a list of vendors, but I don't know if I can post the link here... I don't want to violate the forum rules...
Click to expand...
I am not looking for Basic to modulate Cu dosing SE.

I'm wide open to a private message if you're not comfortable to post vendor info here. Thank you. 🌝
 
Pierogi still has a GB going and I know of a couple of single vial resellers. I bought into a GB with another group in January and it’s been crickets ever since. Another US reseller (can’t post name publicly) has some out for testing. I may jump on it when it’s posted since it’ll be in stock and already tested at that point.

Serlina Chan shows 50 mg kits for $45 on their price list. I don’t know if it’s actually in stock or how much shipping is, but if you don’t mind ordering straight from China, you can check with them as well.
 
Last edited:
Dos-Dox said:
Pierogi still has a GB going and I know of a couple of single vial resellers. I bought into a GB with another group in January and it’s been crickets ever since. Another US reseller (can’t post name publicly) has some out for testing. I may jump on it when it’s posted since it’ll be in stock and already tested at that point.

Serlina Chan shows 50 mg kits for $45 on their price list. I don’t know if it’s actually in stock or how much shipping is, but if you don’t mind ordering straight from China, you can check with them as well.
Click to expand...
I'm having a similar GB experience with a different GB Vendor. Lots of communication about every other product in the GB except the one I purchased. Glad I only bought one my first time through with this GB Vendor.
 
HereKittyKitty said:
I am not looking for Basic to modulate Cu dosing SE.

I'm wide open to a private message if you're not comfortable to post vendor info here. Thank you. 🌝
Click to expand...
What is your intended use for the basic? If you don’t mind sharing🙂 I’m very curious as minimal discussion on it and no context.
 
Dos-Dox said:
Pierogi still has a GB going and I know of a couple of single vial resellers. I bought into a GB with another group in January and it’s been crickets ever since. Another US reseller (can’t post name publicly) has some out for testing. I may jump on it when it’s posted since it’ll be in stock and already tested at that point.

Serlina Chan shows 50 mg kits for $45 on their price list. I don’t know if it’s actually in stock or how much shipping is, but if you don’t mind ordering straight from China, you can check with them as well.
Click to expand...

That US reselller has posted. I picked up 3 kits yesterday (Grey cap).
 
HereKittyKitty said:
To alternate it with Cu. Vial for vial. Nothing mysterious. Wasn't intentionally vague just carelessly so.
Click to expand...
Are you concerned about copper buildup? I've never seen an effect on my copper serum levels from ghk-cu.
 
Initially, yes. I was concerned about negative impact. Now, I feel sort of invested in swapping out vial for vial. I don't stack it with anything.
 
HereKittyKitty said:
Shame I don't know how that seller is... Enjoy the Basic.
Click to expand...

I visited one of my favorite places to see if there was anything new and it was all locked out different than usual and a no new users statement, and when I found my passwords and got in, they had ghk-basic. Putting 2 and 2 together I assume that's who he was talking about.
 
HereKittyKitty said:
How long have you been using Cu?
Click to expand...

Since Dec. Off and on. Haven't been able to do continuously because of pincushion issues, lol!

If you add Glycine to your supplements, it will totally help with the copper ache. BPC has Glycine in it's profile. That's why it helps. After numerous chemical studies and discovering that one of the aminos in the GHK profile is Glycine, I am definitely going to try a blend.
 
Hmmmm... I haven't gotten any aches, fortunately. Thank you for the info about Glycine. I take zinc glycinate several times/week even though I have read mixed info about its necessity. Better safe than sorry.

That's a good while. There is a member on another chat who has been using Cu non-stop for a couple of years. I may cycle Basic every other vial or third or something.
 
You must log in or register to reply here.

Trending Topics

Latest Posts

Forum Statistics

Threads
17,731
Posts
184,138
Members
59,571
Newest
QuixoticGirl
Back
Top Bottom