3D Print
- Thread starter tul9033
- Start date
dionysos
Senior Member
Sorry, I was looking for the actual plans so I can print my own. Thanks though!
dionysos
Senior Member
I'm sure they are out there tul!
Cndmk
Member
I was honestly planning to design my own freezer case once I receive my order from AmoPure, in theory it's a fairly simple design of print with snap clasps.
I just didn't have 3ml vials to measure with my calipers. You can probably take some existing prints and remix them from thingiverse:
- https://www.thingiverse.com/thing:4091459
- https://www.thingiverse.com/thing:5145398
These are NOT my prints, so all credit goes to the original designers.
I'll post my design for a freezer storage container once I get around to building it (probably in a weekend or 2) after I get my order from amopure. I use a Bambu Labs P1S for reference.
My plan is to have a slide in name tag (because I want to keep my testing vials to batch # reference-able), and also build enough room to allow for a small refreeze-able ice pack + cloth bumper on the bottom of the vials to handle any bumps/bruises and make sure that if my freezer ever fails, I will have like probably a day or 2 backup of freezing temps in each container.
When it comes to expensive materials, I over-engineer the heck out of things haha.
cndmk: if you design something, it would be nice of you to post the design file (*.f3d hopefully) and not just the *.stl or *.step, allowing others to modify your design to suit their needs. If I don't find what I want I may design a holder for 10 vials and 2 bacto waters, perhaps with room for a few needles, and a cover that latches or is held on magnetically. But like most of us, I have other priorities...I like your ideas and look forward to seeing what you come up with.
Cndmk
Member
That's actually true, I'll need to build one for the BAC water I'm currently using + vials that are reconstituted. I would rather keep my syringes + alcohol wipes separate as I already have a storage location for that stuff. Currently finishing out some compounded Tirz for the next month and a half, so I'm not going to be fast on building that one, but realistically if I can get a design I like for the freezer stuff, the other one is just slight modifications (without the freezing backup of course).
I have a job I love and I'm comfortable, so I'm not looking to sell stuff and I'll probably just post them on Thingiverse + Maker World and link them in this post. If I can figure out how to make .f3d files I'll post them too.
I appreciate the hustle of people trying to sell cases and what not, but I also believe that decent designs should be available for people with the tools necessary to make their own, that's the maker movement after all in my head.
I have a job I love and I'm comfortable, so I'm not looking to sell stuff and I'll probably just post them on Thingiverse + Maker World and link them in this post. If I can figure out how to make .f3d files I'll post them too.
I appreciate the hustle of people trying to sell cases and what not, but I also believe that decent designs should be available for people with the tools necessary to make their own, that's the maker movement after all in my head.
Here's a few I've been working on:
www.printables.com
www.printables.com
www.printables.com
10 ML and 4 ML Vial Holder by Alexander | Download free STL model | Printables.com
Holder for 10 ML and 4 ML Vials with gasket | Download free 3D printable STL models
www.printables.com
Parametric Rugged Box for 3ml Vials by MB32 | Download free STL model | Printables.com
Update to my previous rugged box remix, now parameterized to be customizable in Fusion 360. | Download free 3D printable STL models
www.printables.com
Peptide 3ml Vials Rugged Box (Parametric) by Dan Cernogorsky | Download free STL model | Printables.com
Store and transport the peptide vials | Download free 3D printable STL models
www.printables.com
Cndmk
Member
These look awesome!Here's a few I've been working on:
10 ML and 4 ML Vial Holder by Alexander | Download free STL model | Printables.com
Holder for 10 ML and 4 ML Vials with gasket | Download free 3D printable STL modelsParametric Rugged Box for 3ml Vials by MB32 | Download free STL model | Printables.com
Update to my previous rugged box remix, now parameterized to be customizable in Fusion 360. | Download free 3D printable STL modelsPeptide 3ml Vials Rugged Box (Parametric) by Dan Cernogorsky | Download free STL model | Printables.com
Store and transport the peptide vials | Download free 3D printable STL models
Mind if I remix them? I was curious to try some living hinges/built in curved clasps instead of requiring external materials (I'm always too lazy with buying dowels/hardware).
They're not actually mine, just some I've printed. Here is one that has it's own clasp. However, I found the lid pops out of the hinge somewhat easily. The Hospira BAC water bottle is 34x72mm which is what I'm trying to find a box for.
Parametric Rugged Vial Box by cbagwell | Download free STL model | Printables.com
Rugged style storage box for vials that can be customized. | Download free 3D printable STL models
www.printables.com
What program are you using to modify these cases?
Cndmk
Member
So I've used blender for certain projects, but as a means of making things with simple designs (like a box or simple attachment) or joining objects together, I use tinkercad, it's kind of like my guilty pleasure of making easy projects or remixing simple stuff from 3d printing websites.
It's definitely a PITA to use on some things, but when I modified a print for an electric charging cable holder, it took me like a half hour and it was just convenient. It also helps when the texture of the object doesn't require any special attention (again like a box to hold things), because then I would probably break out blender.
rafiki0794
New Member
Hey Mekks, would you be able to sell me one of these BAC water cases?
PM inc.
Did you ever find or make a printable case for the 30 mL Hospira vials?
DM me your email and I'll send it to you.
