Amopure L60 Experience

normal said:
When did you receive?
Click to expand...
I got my package on 10/28. Just reconstituted it an hour ago and then injected 2.5mg. I’ve been having pretty severe reaction sites lately though, last dose I had was 5mg of empower tirzepatide. It’s still stinging in the area I injected. I’m wondering if I filter it if it will not sting, going to buy some filters and try that since I don’t want to waste it all.
 

Attachments

  • IMG_1170.jpeg
    IMG_1170.jpeg
    1.4 MB · Views: 66
mduckett99 said:
I ordered the L30, received it in early October, and split the order with another RS. Filtered when I reconstituted. I am on my 3rd injection and have not had any stinging. RS #2 has taken one injection and reports no stinging.
Click to expand...
I hope this eventually goes away. Is the product working though?
 
rkl123 said:
I bought Amo back in mid September. Had a different vial that I needed to finish researching. I finally used my Amo vial in research. Vial had good vacuum. Peptide was in a few large solid chunks. Took ~5-10 min to dissolve with a chunk on the wall that was stubborn. It finally all dissolved. Injected the RS. RS reported absolutely no burning.

Would I buy Amo again? Unsure. The burning reports are quite scary. But their site is great, prices are decent, they accepted Alibaba Pay, and support was great.
Click to expand...
Where did site go now?
 
Allbad said:
I just did my first L60 injection from amopure and had some stinging.
Click to expand...
It is frustrating and somewhat concerning to keep seeing this. I had hoped the problem would go away. I have some, but it will probably go to the back of the line.
 
Just to note, amo t30 was giving me pretty a pretty severe isr every injection. I've tried strive compounded and name brand zepbound after a few doses of amo, and both have no isr at all, can't even tell I injected.

Haven't tested my replacement batch of amo yet
 
normal said:
Just to note, amo t30 was giving me pretty a pretty severe isr every injection. I've tried strive compounded and name brand zepbound after a few doses of amo, and both have no isr at all, can't even tell I injected.

Haven't tested my replacement batch of amo yet
Click to expand...
When was your T30 from?
 
Finally got around to trying my Amo L30 that I ordered in August. I filtered, had no stinging with injection and no ISR 24 hours later. I did note that the pH tested closer to alkaline after reconstitution so perhaps accounts for some reports of burning. Feels just the same as Skye.
 
nurseratchit said:
Finally got around to trying my Amo L30 that I ordered in August. I filtered, had no stinging with injection and no ISR 24 hours later. I did note that the pH tested closer to alkaline after reconstitution so perhaps accounts for some reports of burning. Feels just the same as Skye.
Click to expand...
I am glad to hear your report on this. I still think the variation with this vendor is a bit nutty. My L30 is from October, no testing done yet.
 
L60, been using for 4 weeks not filtering and zero stinging. Feel exactly the same as I did on Zepbound, sinusitis still present. Very slowly still losing weight after 16 months on a GLP 1, but those very few pounds have led to 1 full size down. I have no ass left. Just call me droopy drawers.
 
I ordered L15 late sept, and it is an immediate burn on injection that goes away after about an hour. I use bac water and draw and inject with two different needles. I ph tested it and it’s 7, just like Ozempic, and some USA vendor sema I have on hand. It doesn’t burn til I push the liquid then it’s immediate. No delayed redness or itching after, which would suggest an immune response.

It is very effective, and broke through my sema plateau, also they were quick to offer replacement or refund when I emailed them. They say they are working on a new formulation.

I think the fact that I recvd my order within 3 days, paid with Alipay at $1.66/mg, the product effectiveness, and their customer service kind of makes the sting worth it.
 
I had a batch of L15 from end of August that my RS just tried. Vial had broken puck, good vacuum and the puck dissolved relatively quickly without any sticking to the side. No burning / stinging on injection at all and so far no ISR. Was reconstituted with Hospice BAC water, not filtered. New syringe to draw / dose. Hope that helps someone.

*edit to correct spelling.
 
Last edited:
Pr0digalSun said:
I ordered L15 late sept, and it is an immediate burn on injection that goes away after about an hour. I use bac water and draw and inject with two different needles. I ph tested it and it’s 7, just like Ozempic, and some USA vendor sema I have on hand. It doesn’t burn til I push the liquid then it’s immediate. No delayed redness or itching after, which would suggest an immune response.

It is very effective, and broke through my sema plateau, also they were quick to offer replacement or refund when I emailed them. They say they are working on a new formulation.

I think the fact that I recvd my order within 3 days, paid with Alipay at $1.66/mg, the product effectiveness, and their customer service kind of makes the sting worth it.
Click to expand...
I gave a vial from my kit to a (nurse) friend of mine who is used to oils and other peptide injectables and I got this text today:
IMG_7647.jpeg
 
rkl123 said:
I bought Amo back in mid September. Had a different vial that I needed to finish researching. I finally used my Amo vial in research. Vial had good vacuum. Peptide was in a few large solid chunks. Took ~5-10 min to dissolve with a chunk on the wall that was stubborn. It finally all dissolved. Injected the RS. RS reported absolutely no burning.

Would I buy Amo again? Unsure. The burning reports are quite scary. But their site is great, prices are decent, they accepted Alibaba Pay, and support was great.
Click to expand...
Does the 60mg come in a 3mL vial or is it bigger?
 
Another week of amopure. 10mg this time. No burn
 
Update: so I have the L60 from amopure received on 10/28. I had immediate bad burning and stinging after injecting. Then I filtered the tirzepatide and put into a new sterile vial. Injected again and had burning once again. Then I filtered a second time and also added 2ml of bac water (initially had used 3ml of bac) i injected a third time to see if it would fix anything and the burning feeling was still there but definitely significantly less bad. I tried emailing them to see if they will replace the product. Not sure if I should try to reconstitute another vial to make sure it’s not just that one but seems kind of pointless. I do feel like it is tirzepatide but haven’t gotten it tested yet, I don’t think I will. Maybe they will replace it for me?
 
Allbad said:
Update: so I have the L60 from amopure received on 10/28. I had immediate bad burning and stinging after injecting. Then I filtered the tirzepatide and put into a new sterile vial. Injected again and had burning once again. Then I filtered a second time and also added 2ml of bac water (initially had used 3ml of bac) i injected a third time to see if it would fix anything and the burning feeling was still there but definitely significantly less bad. I tried emailing them to see if they will replace the product. Not sure if I should try to reconstitute another vial to make sure it’s not just that one but seems kind of pointless. I do feel like it is tirzepatide but haven’t gotten it tested yet, I don’t think I will. Maybe they will replace it for me?
Click to expand...

Did yours have the batch number on the front?
 
Amopures email reply to me:
(I’ll keep ya’ll updated on my experience)

“Dear Valued Customer,

I have reviewed your order and confirmed with the company that the research products you received were internally tested before shipping, with no issues regarding purity or quantity.

If your test subjects experienced any discomfort (burning) from the “stinging” effect, we sincerely apologize. While this occurrence is extremely rare, it is a possibility seen across other suppliers as well. As the manufacturer, we can only guarantee the purity and quantity of the research products.

However, you are an important customer to us, and we truly care about your experience!

As an apology, I will make a request to the company for one of the following options:

1.A free replacement of the product you ordered (from a new batch).
2.Refund.
Please choose your preferred option!

Please also destroy your remaining vials.(Please provide photos or videos of the destruction)

Although most of our customers are satisfied with our products, we take every piece of feedback seriously. Specifically, we have thoroughly investigated concerns regarding any discomfort (burning) caused by the “stinging” sensation and have adjusted our formula to enhance the experience. We have not received any complaints about a burning sensation from recent batches, but rest assured that we will continue to monitor and address any concerns closely. Should you encounter any issues, please feel free to contact us so that we can assist you promptly.

We value your trust and appreciate your continued support as we strive to provide the best products. If you have any questions or need assistance, we are always here to help.

Sincerely,
Amo Team

NOTE:
These research products are intended as the research chemical only.
These research products are not drug, food, or cosmetic and may not be misbranded, misused or mislabled as a drug, food or cosmetic.”
 
Last edited:
@Allbad
🙁
They made it seem that starting in mid-Oct that the "formula was changing" and they were including batch numbers. I hope that you got old stock (maybe because L60?) and that they truly ARE changing their production. You received the SAME response that many of us have already gotten.
 
ZakAP said:
@Allbad
🙁
They made it seem that starting in mid-Oct that the "formula was changing" and they were including batch numbers. I hope that you got old stock (maybe because L60?) and that they truly ARE changing their production. You received the SAME response that many of us have already gotten.
Click to expand...
I ended up getting the refund which was great. I wanted to like this vendor but it really makes me hesitant to order from them again.
 
Allbad said:
I ended up getting the refund which was great. I wanted to like this vendor but it really makes me hesitant to order from them again.
Click to expand...
With all the refunds and replacements they have given you would think they would get their shit together and start making a good product that they won't need to do that anymore.
 
edwardferreyra said:
What is the website for amopure ?
Click to expand...
I see you are new here and all of your posts are asking about information that is already available on this forum - about where to buy/contacts. I would HIGHLY suggest reading through some threads and finding the information you are looking for. You do not want to get scammed or get a faulty product.
 
Last edited:
You must log in or register to reply here.

Trending Topics

Latest Posts

Members Online

Total: 153 (9 Members & 144 Guests)

Forum Statistics

Threads
3,271
Messages
53,712
Members
6,950
Latest member
deluxan

Share This Page!

Back
Top Bottom