SLU-PP-332 as a Workout Replacement

[jimbothigpen]

Hearing a bit about SLU-PP-332 lately. Most of the folks testing it appear to be looking for enhancements for their workouts. Curious if anyone in these forums has done any testing with it as a replacement for exercise -- as a potential stop-gap measure for the muscle loss that can accompany rapid weight loss while on GLP-1s. And if you wouldn't mind sharing your experiences.

(To be clear: I'm not soliciting moral objections to the practice of getting something for nothing.)

 

[Someguy22922]

I've taken an absolute shit load of SLU PP 332.

Oral
Trans-dermal
Injectable
Freeze Dried

Been taking it non stop for something like 28 weeks now haha.

With reta the weight loss is absolutely absurd as they both enhance mitochondria capacity.

It seems to have a VERY short half life.

What I've done is start with oral -> transdermal -> Injectable -> Freeze Dried (lasts longer)

In studies they solely use injectable, the issue with injectable is it's only good for 1 month in the fridge, so it requires frequent orders.

When my weight loss stalled on oral I switched to transdermal and lost more weight with no additional calorie change or cardio. Same story with transdermal to injectable / freeze dried. Solely inject now. Sub-q.

 

[jimbothigpen]

What dosage are you taking, if you don't mind sharing? I had a 10g delivery of raws a few days ago from SSA, have been making capsules.

 

[raw_oyster_eater]

do you make the injections up yourself? the vials i see are very low doses.

 

[Someguy22922]

I do. I also freeze dry myself.

I do 1 mg / ml. It really depends how much organic solvent you are comfortable taking.

250 mcg twice a day. Once AM pre fasted cardio, once preworkout.

Do you believe you measure the capsules correctly? Geometric dilution on a mcg scale, plus you need a scale that is 0.0001 or 0.00001 accurate that's air tight (accuracy depends on the volume of caps your making) is just too much work for me. I'll stick to transdermal / injectable. Solutions with sonication are the way to go.

 

[jimbothigpen]

I'm "researching" higher dosages at the moment. Started 1mg 2x daily, to 2mg 2x, 5mg 2x, and today 10mg 2x, working up to 100mg. If I knew how to turn the raws into injectables, I'd be all over that. I have a scale accurate to .001g (calibrated every time I use it just to be sure).

 

[Someguy22922]

I'm "researching" higher dosages at the moment. Started 1mg 2x daily, to 2mg 2x, 5mg 2x, and today 10mg 2x, working up to 100mg. If I knew how to turn the raws into injectables, I'd be all over that. I have a scale accurate to .001g (calibrated every time I use it just to be sure).

They use injectable in studies because oral had poor bio availability. They didn't really elaborate on numbers sadly.

If you have brewed AAS, or currently brew, it's not much of a different process minus the solvents required. If you increase the organic solvent %, you can get it to hold at much higher MG / ML.

 

[jimbothigpen]

They use injectable in studies because oral had poor bio availability. They didn't really elaborate on numbers sadly.

Yeah, I really wish I was smarter & could feel comfortable with just shaking up a vial of raws + BAC water to inject. But I'd probably kill myself.

 

[jimbothigpen]

If you have brewed AAS, or currently brew, it's not much of a different process minus the solvents required. If you increase the organic solvent %, you can get it to hold at much higher MG / ML.

Completely new territory for me. Any pointers to guides?

 

[Someguy22922]

Yeah, I really wish I was smarter & could feel comfortable with just shaking up a vial of raws + BAC water to inject. But I'd probably kill myself.

It's more complicated than raws + BAC haha. SLU PP 332 is not readily soluble in water. It's more of a lipophilic compound and requires 1 organic solvent, and 2 solubility enhancers (possibly 3 if you have it around) in specific ratios.

 

[Someguy22922]

Completely new territory for me. Any pointers to guides?

https://www.reddit.com/r/steroids/comments/6lvsul/homebrew_ssjhayes_homebrew_guide

It has an initial investment. Making AAS is significantly easier than coming up with chemical compositions for unique items. It's literally 4 ingredients:

Raws
BA
BB
Oil

0.22 um filter, don't be lazy and get a syringe filter unless you have thumbs of steel. If you make massive volumes poly cap (5 liters) is the way to go, moderate get a buchner filter + filter paper off aliexpress.

 

[jimbothigpen]

https://www.reddit.com/r/steroids/comments/6lvsul/homebrew_ssjhayes_homebrew_guide

It has an initial investment. Making AAS is significantly easier than coming up with chemical compositions for unique items. It's literally 4 ingredients:

Raws
BA
BB
Oil

0.22 um filter, don't be lazy and get a syringe filter unless you have thumbs of steel. If you make massive volumes poly cap (5 liters) is the way to go, moderate get a buchner filter + filter paper off aliexpress.

Wow, thanks for that. Looks maybe slightly easier than rebuilding a carburetor. If I keep up with the slupp after this first batch is finished, I'll plan a little shopping spree.

 

[Someguy22922]

Wow, thanks for that. Looks maybe slightly easier than rebuilding a carburetor. If I keep up with the slupp after this first batch is finished, I'll plan a little shopping spree.

I know absolutely nothing about vehicles, but I have a ton of education in the sciences, so I'd definitely agree with that statement haha. I literally broke my toilet pump installing a bidet. Stupid thing was reverse threaded and plastic and stripped. I think I spent something like 3 hours drilling a hole in my porcelain sink last weekend to install a RO + De-ionizer to make lab grade water (first step anways). I was quite pleased with myself.

 

[jimbothigpen]

I do have some DMSO en route + an ultrasonic water bath cleaner doohickie. Planning to see how many mg I can get per ml that route. Initially thought I had read 2mg/ml DMSO would be near max, but I've heard other sources claiming up to about 30mg/ml.

 

[Someguy22922]

I do have some DMSO en route + an ultrasonic water bath cleaner doohickie. Planning to see how many mg I can get per ml that route. Initially thought I had read 2mg/ml DMSO would be near max, but I've heard other sources claiming up to about 30mg/ml.

I'll DM ya the exact resource you need. I've gone up to 10 mg/ml, but I don't find it necessary.

 

[jimbothigpen]

I'll DM ya the exact resource you need. I've gone up to 10 mg/ml, but I don't find it necessary.

That'd be fantastic, much appreciated!

 

[TetsuNW]

I'm interested in this compound but all the research I've done makes it seem like it's probably not worth it. It's so expensive, what is it at SSA, like $1,200 for 100g? That and the results are very mixed at best. I can't help but think and ECA stack would be a better choice for fatloss, cost is unquestionably better. I'm keeping an eye on things and hoping costs come down though.

 

[jimbothigpen]

$180 for 10g raws at SSA if you're adventurous.

 

[jimbothigpen]

And 10g is equal to 40000 of those 250mcg pills everyone sells. So pretty damn cheap, if you ask me.

 

[Someguy22922]

And 10g is equal to 40000 of those 250mcg pills everyone sells. So pretty damn cheap, if you ask me.

This. You gotta remember it's usually dosed in MCG, 1 gram = 1 000 000 mcg.