Test before use

[Rodboyjr]

Hi, I’m relatively new to using Retatrutide—I previously used Zepbound. I currently have an unopened 6mg kit, but I haven’t used it yet because I’m unsure how to confirm whether my specific batch has already been tested or if I need to conduct my own test to verify the COA (Certificate of Analysis).

Someone shared a link to the STG Telegram group, but I find it a bit overwhelming and difficult to navigate. I’ve been trying to figure out whether my batch has existing test results, and I don’t want to spend money on a test if it’s already been done.

My main questions are:

• How do I check if my specific batch has already been tested?
• I got my batch from Nexaph—what abbreviation is typically used for this vendor in the community?

I’ve already purchased everything I think I need (insulin syringes, gloves, alcohol pads, filters, BAC water, etc.), but I haven’t done any injections yet because I want to be 100% sure of what I’m putting into my body.

Should I test this current batch myself, or would it be safer/better to order a batch that’s already been widely tested and verified by the community?

I’d really appreciate any help or guidance from those with more experience. Thank you!

Also, I know that the QR code shows the vendors test, but it seems to be agreed-upon most people that you can’t trust those test.

 

[Skidude]

Hi, I’m relatively new to using Retatrutide—I previously used Zepbound. I currently have an unopened 6mg kit, but I haven’t used it yet because I’m unsure how to confirm whether my specific batch has already been tested or if I need to conduct my own test to verify the COA (Certificate of Analysis).

Someone shared a link to the STG Telegram group, but I find it a bit overwhelming and difficult to navigate. I’ve been trying to figure out whether my batch has existing test results, and I don’t want to spend money on a test if it’s already been done.

My main questions are:

• How do I check if my specific batch has already been tested?
• I got my batch from Nexaph—what abbreviation is typically used for this vendor in the community?

I’ve already purchased everything I think I need (insulin syringes, gloves, alcohol pads, filters, BAC water, etc.), but I haven’t done any injections yet because I want to be 100% sure of what I’m putting into my body.

Should I test this current batch myself, or would it be safer/better to order a batch that’s already been widely tested and verified by the community?

I’d really appreciate any help or guidance from those with more experience. Thank you!

Also, I know that the QR code shows the vendors test, but it seems to be agreed-upon most people that you can’t trust those test.

Absolutely always question vendor provided testing.
The one caveat would be that on mass tested vendors (those that many users test), especially with the type of packaging that mitigates mistaken product delivery, your risk level is less than ordering from a random, non tested, non labeled.
It is up to you to decide your risk.
That batch is from vendor post test:
Jano from Vendor

This is from 3rd party testing server on SNP/Nexaph site:
Jano Result 3rd party

STG no longer supports/reports on Nexaph

The only way to be 99.9% sure is test it yourself, but it appears to be a reasonable bet that you are good to go.

I would practice doing what I just did by searching Nexaph Telegram-
You can find it on their website, in this community's vendor section, or HERE

 

[cmath]

Do you know the reason why they know longer report on SNP?

 

[Skidude]

Do you know the reason why they know longer report on SNP?

I think there was drama about potential doxing or something- i honestly do not pay attention/buy into most of the "As the Peptide world turns" drama...

 

[Ted R]

Hi, I’m relatively new to using Retatrutide—I previously used Zepbound. I currently have an unopened 6mg kit, but I haven’t used it yet because I’m unsure how to confirm whether my specific batch has already been tested or if I need to conduct my own test to verify the COA (Certificate of Analysis).

Someone shared a link to the STG Telegram group, but I find it a bit overwhelming and difficult to navigate. I’ve been trying to figure out whether my batch has existing test results, and I don’t want to spend money on a test if it’s already been done.

My main questions are:

• How do I check if my specific batch has already been tested?
• I got my batch from Nexaph—what abbreviation is typically used for this vendor in the community?

I’ve already purchased everything I think I need (insulin syringes, gloves, alcohol pads, filters, BAC water, etc.), but I haven’t done any injections yet because I want to be 100% sure of what I’m putting into my body.

Should I test this current batch myself, or would it be safer/better to order a batch that’s already been widely tested and verified by the community?

I’d really appreciate any help or guidance from those with more experience. Thank you!

Also, I know that the QR code shows the vendors test, but it seems to be agreed-upon most people that you can’t trust those tests

Hi, I’m relatively new to using Retatrutide—I previously used Zepbound. I currently have an unopened 6mg kit, but I haven’t used it yet because I’m unsure how to confirm whether my specific batch has already been tested or if I need to conduct my own test to verify the COA (Certificate of Analysis).

Someone shared a link to the STG Telegram group, but I find it a bit overwhelming and difficult to navigate. I’ve been trying to figure out whether my batch has existing test results, and I don’t want to spend money on a test if it’s already been done.

My main questions are:

• How do I check if my specific batch has already been tested?
• I got my batch from Nexaph—what abbreviation is typically used for this vendor in the community?

I’ve already purchased everything I think I need (insulin syringes, gloves, alcohol pads, filters, BAC water, etc.), but I haven’t done any injections yet because I want to be 100% sure of what I’m putting into my body.

Should I test this current batch myself, or would it be safer/better to order a batch that’s already been widely tested and verified by the community?

I’d really appreciate any help or guidance from those with more experience. Thank you!

Also, I know that the QR code shows the vendors test, but it seems to be agreed-upon most people that you can’t trust those test.

There is a Nexaph Third Party Test server on Telegram, just not on STG any longer. DM Michelle @fit_curious and ask for an invite to join that server. The TPT report you are looking for is available there, and you will want to make sure you read the TPT report before you recon and pin as it tested out a good bit overfilled.

 

[Skidude]

There is a Nexaph Third Party Test server on Telegram, just not on STG any longer. DM Michelle @fit_curious and ask for an invite to join that server. The TPT report you are looking for is available there, and you will want to make sure you read the TPT report before you recon and pin as it tested out a good bit overfilled.

 

[Ted R]

View attachment 6513

22% overfilled!

 

[Rodboyjr]

Absolutely always question vendor provided testing.
The one caveat would be that on mass tested vendors (those that many users test), especially with the type of packaging that mitigates mistaken product delivery, your risk level is less than ordering from a random, non tested, non labeled.
It is up to you to decide your risk.
That batch is from vendor post test:
Jano from Vendor
View attachment 6504

This is from 3rd party testing server on SNP/Nexaph site:
Jano Result 3rd party

STG no longer supports/reports on Nexaph
View attachment 6505

The only way to be 99.9% sure is test it yourself, but it appears to be a reasonable bet that you are good to go.

I would practice doing what I just did by searching Nexaph Telegram-
You can find it on their website, in this community's vendor section, or HERE

Thank you this was very helpful Information! I’m guessing 2.5 pence must mean pretty close to a 3P testing result

 

[Rodboyjr]

There is a Nexaph Third Party Test server on Telegram, just not on STG any longer. DM Michelle @fit_curious and ask for an invite to join that server. The TPT report you are looking for is available there, and you will want to make sure you read the TPT report before you recon and pin as it tested out a good bit overfilled.

Thanks for this. I’m going to add Michelle on telegram

 

[Rodboyjr]

View attachment 6513

Was this from the group that Ted R mentioned?

 

[Skidude]

Was this from the group that Ted R mentioned?

I do not know, this is from 3rd party testing on SNP/Nexaph Telegram