Amopure L60 Experience

[rkl123]

I bought Amo back in mid September. Had a different vial that I needed to finish researching. I finally used my Amo vial in research. Vial had good vacuum. Peptide was in a few large solid chunks. Took ~5-10 min to dissolve with a chunk on the wall that was stubborn. It finally all dissolved. Injected the RS. RS reported absolutely no burning.

Would I buy Amo again? Unsure. The burning reports are quite scary. But their site is great, prices are decent, they accepted Alibaba Pay, and support was great.

 

[nccane]

I bought Amo back in mid September. Had a different vial that I needed to finish researching. I finally used my Amo vial in research. Vial had good vacuum. Peptide was in a few large solid chunks. Took ~5-10 min to dissolve with a chunk on the wall that was stubborn. It finally all dissolved. Injected the RS. RS reported absolutely no burning.

Would I buy Amo again? Unsure. The burning reports are quite scary. But their site is great, prices are decent, they accepted Alibaba Pay, and support was great.

Same experience and thoughts with an Oct t30 buy

 

[aDerpyPenguin]

Glad to see some positive responses. Ordered L60 October 2, but still have 10mg compound so I haven’t reconstituted yet.

 

[Anothertimes1010]

Just bought L20 and didn’t realize they had an ongoing stinging problem. Hoping it doesn’t sting my like lava

 

[Dee X]

I bought Amo back in mid September. Had a different vial that I needed to finish researching. I finally used my Amo vial in research. Vial had good vacuum. Peptide was in a few large solid chunks. Took ~5-10 min to dissolve with a chunk on the wall that was stubborn. It finally all dissolved. Injected the RS. RS reported absolutely no burning.

Would I buy Amo again? Unsure. The burning reports are quite scary. But their site is great, prices are decent, they accepted Alibaba Pay, and support was great.

How come you're unsure if you're not getting the burning sensation yourself? Is it just that others are reporting it with T30?

Just wondering 🙂

 

[rkl123]

How come you're unsure if you're not getting the burning sensation yourself? Is it just that others are reporting it with T30?

Just wondering 🙂

Amo hasn't said exactly what the problem is and they seemingly haven't totally resolved it since we still see occasional reports. So I would likely do a different vendor or a group buy to guarantee I don't ever experience what folks have had happen.

 

[Dee X]

Amo hasn't said exactly what the problem is and they seemingly haven't totally resolved it since we still see occasional reports. So I would likely do a different vendor or a group buy to guarantee I don't ever experience what folks have had happen.

Even if Amo does say what the problem is, I would be wary. This is why testing your samples is important.

Right now, they're at the "it's normal for injections to burn for 20 minutes!" stage, so hopefully we'll find out more info from people around the communities testing regularly.

 

[rkl123]

Even if Amo does say what the problem is, I would be wary. This is why testing your samples is important.

Right now, they're at the "it's normal for injections to burn for 20 minutes!" stage, so hopefully we'll find out more info from people around the communities testing regularly.

They've basically stunted their own growth. Had they over corrected ("We found the issue, it is X. We will ship you free replacements, and will do Y for it to never happen again"), they'd probably be the supreme vendor. Because other than price, they win on almost everything else for the main GLP's.

 

[jwillhite6]

I bought Amo back in mid September. Had a different vial that I needed to finish researching. I finally used my Amo vial in research. Vial had good vacuum. Peptide was in a few large solid chunks. Took ~5-10 min to dissolve with a chunk on the wall that was stubborn. It finally all dissolved. Injected the RS. RS reported absolutely no burning.

Would I buy Amo again? Unsure. The burning reports are quite scary. But their site is great, prices are decent, they accepted Alibaba Pay, and support was great

So I have been searching and can't find it. However. L10,L20, 60 etc is what amopure website labels for tirzepatide correct?

 

[Dee X]

So I have been searching and can't find it. However. L10,L20, 60 etc is what amopure website labels for tirzepatide correct?

Yup

 

[jwillhite6]

Yup

Thank you!!

 

[Anothertimes1010]

Interested on how many have burning with amopure vendor. I’ve been on med for months and never had any burning from other vendors.

 

[rogertheveggie]

They've basically stunted their own growth. Had they over corrected ("We found the issue, it is X. We will ship you free replacements, and will do Y for it to never happen again"), they'd probably be the supreme vendor. Because other than price, they win on almost everything else for the main GLP's.

I’ve had several kits in my Amo cart and thought about clicking purchase, was so close. But all the stinging reports and lackluster response from the company has kept me from it. I decided to delete the bookmark from my list of vendors, as I won’t be ordered from them.

 

[skunknuts]

AMO doesn’t have a server anywhere do they? It’s a shame they aren’t doing what they need to build a positive reputation. Just be forthcoming and play it straight, and you’ll build cred. The market is evolving so quickly with consumers demanding transparency and taking testing into their own hands that the way AMO is handling this issue is very self defeating.

 

[nurseratchit]

Glad it’s not burning for you. I don’t “think” the burning is necessarily something to be scared about. There does seem to be more reports of it from users who have experience with other vendors and have not had previous ISRs. I suspect it may have something to do with their lyophilization process and whatever excipients they use. Perhaps some individuals are more sensitive to whatever ingredients they are using. Some issues may be user technique.

The vendor also told at least 2 people I know of that they have recently changed from whatever they were using before to mannitol so maybe they’ve fixed the stinging issue or maybe they’re just blowing smoke. That seems like a long time for the pucks to dissolve.

A large group of us went in on testing with Peptide Test of their tirz in August which had good purity & fill results but failed sterility. Separate testing in another group also had a failed sterility test by Janoshik. This may or may not matter to you. Some are of the opinion this is not a big deal as sterility testing was not commonly done before and there is a low likelihood of serious infection with a subcutaneous injection. But it may reflect other poor manufacturing practices. If sterility does matter to you, you can buy .22 micron PES syringe filters to remove most contaminants without removing your peptide.

I will likely use my product with a filter but not likely to order from them again anytime soon. I did like the ease of ordering but not the $60 shipping which I wasn’t paying close attention to at the time.

 

[mduckett99]

I ordered the L30, received it in early October, and split the order with another RS. Filtered when I reconstituted. I am on my 3rd injection and have not had any stinging. RS #2 has taken one injection and reports no stinging.

 

[Brilliant-Mud]

I received my first order of L30. I reconstituted using the filter method. I took my first dose Saturday. No issues at all to report.

 

[Esmiee]

I received my L60 on Oct 11, I did notice immediately it stung. Left the site red the first time I used it. Next time stung less. Another person who lives with me also tried L60 and experienced stinging. We’ve tried it three weeks in a row now.

I also experienced some of those weird chunks that didn’t want to dissolve at first. Took a lot of gentle mixing for like 10 minutes and I got them all dissolved.

Mixed in 3ml of bac if that makes any difference.

 

[Goreandglitter]

I have L30 no stinging issues

 

[Tinygrashopa]

I’m curious how many AMO Tirz users have had burning vs no burning? I know there was a poll for Tirz burning, but I’d love to see what an actual AMO poll results would be.

 

[gabe323]

I’m curious how many AMO Tirz users have had burning vs no burning? I know there was a poll for Tirz burning, but I’d love to see what an actual AMO poll results would be.

There was an Amo thread that was pretty much the amo burning poll before the Tirz poll.

 

[Ms_Ery]

I apologize in advance if this is a dumb question, but what is an ISR?

 

[Gerry]

I received my L60 on Oct 11, I did notice immediately it stung. Left the site red the first time I used it. Next time stung less. Another person who lives with me also tried L60 and experienced stinging. We’ve tried it three weeks in a row now.

I also experienced some of those weird chunks that didn’t want to dissolve at first. Took a lot of gentle mixing for like 10 minutes and I got them all dissolved.

Mixed in 3ml of bac if that makes any difference.

I just mixed Amo Tirz, which was delivered on Oct 26th. I forget when I ordered, but right when the stinging tirz thread landed. I mixed a T15 (L15 on their website) to 10mg/ml. I took 20 units—no stinging, no isr.
@Ms_Ery ISR = Injection site reaction. It could be stinging/burning, swelling, hives, I don't know what else. I have fortunately never had one.

 

[normal]

I just mixed Amo Tirz, which was delivered on Oct 26th. I forget when I ordered, but right when the stinging tirz thread landed. I mixed a T15 (L15 on their website) to 10mg/ml. I took 20 units—no stinging, no isr.
@Ms_Ery ISR = Injection site reaction. It could be stinging/burning, swelling, hives, I don't know what else. I have fortunately never had one.

Did your kit have a batch number on it?

 

[Gerry]

Did your kit have a batch number on it?

Here's a little photo op of the packaging and pucks. The batch number is there, but I don't know what that is worth. I doubt there is enough tracking and accountability between whoever manufactured this, amo and me.

 

[Gerry]

dissolved very quickly, probably because there was more surface area due to the puck being broken.

 

[normal]

dissolved very quickly, probably because there was more surface area due to the puck being broken.

Thank you, helps us a bit as it seems like we all got this same latest batch, so will make it easier to compare.

Of course that number could mean nothing lmao

 

[SmokeySquid]

@Gerry I would be careful about posting pictures of the actual packaging. Wouldn't want to better help customs seize future amo orders.

 

[swaamy]

Here's a little photo op of the packaging and pucks. The batch number is there, but I don't know what that is worth. I doubt there is enough tracking and accountability between whoever manufactured this, amo and me.
View attachment 3254View attachment 3255View attachment 3256View attachment 3257View attachment 3258View attachment 3259

should you DM the AMO number?

 

[Fonkymonky]

What are your thoughts about the effectiveness of the Amo product?

 

[kroert99]

I’m curious how many AMO Tirz users have had burning vs no burning? I know there was a poll for Tirz burning, but I’d love to see what an actual AMO poll results would be.

L30 here, injected 7mg and slight burning for a second.

 

[mopo89]

@Gerry I would be careful about posting pictures of the actual packaging. Wouldn't want to better help customs seize future amo orders.

I second this - we generally should not be posting pictures of packaging.

 

[runte]

Expecting L30 this week so curious about the quality/effectiveness of the latest batches as well.

 

[nonyabizznez]

Is that a thing? It's just a brown box, customs won't seize based of the size of the box I doubt and they usually don't open the packages and if they open the package, I doubt they have a database with all the substance, all the vendors, what they look like, etc.

I wonder if it's a "tell" that 150 t-shirts were shipped in that box? 🤣

 

[SmokeySquid]

I guess my thought is that as time goes on, it will be less people looking at packages and more machines. If you could upload some pictures of known packaging containing smuggled substances, it would be much easier for it to get flagged and looked at.

Probably complete nonsense at this stage as I know the ports are fighting this technology but I'm sure it's coming.

 

[Dallas_vibes]

I apologize in advance if this is a dumb question, but what is an ISR?

Injection site reaction 🙂

 

[normal]

L30 here, injected 7mg and slight burning for a second.

When did you receive your order

 

[kroert99]

When did you receive your order

Ordered 9/2 and can't remember when it was delivered. I just started using it.

 

[randomlacy]

I bought Amo back in mid September. Had a different vial that I needed to finish researching. I finally used my Amo vial in research. Vial had good vacuum. Peptide was in a few large solid chunks. Took ~5-10 min to dissolve with a chunk on the wall that was stubborn. It finally all dissolved. Injected the RS. RS reported absolutely no burning.

Would I buy Amo again? Unsure. The burning reports are quite scary. But their site is great, prices are decent, they accepted Alibaba Pay, and support was great.

I've researched Amo for a few months now and haven't had any problems with burning. I have researched the L5mg, R5mg, and R5mg. I wonder if some of the issue is what is getting used to reconstitute? It's just a guess and i could be wrong.

 

[ZakAP]

I've researched Amo for a few months now and haven't had any problems with burning. I have researched the L5mg, R5mg, and R5mg. I wonder if some of the issue is what is getting used to reconstitute? It's just a guess and i could be wrong.

No - I took an injection of bac water only and no issues.

 

[aDerpyPenguin]

Finally got around to using my L60 I ordered Oct 3. Reconstituted with 3ml of Hospira BAC. Used 50 units for a 10mg dose. Moved up from 7.5mg from SlimDownRX. Experienced no pain or burning.

 

[bguz1200]

I’m curious how many AMO Tirz users have had burning vs no burning? I know there was a poll for Tirz burning, but I’d love to see what an actual AMO poll results would be.

Yeah, that's a good idea. I have had no burning/sting using L60.

 

[Dee X]

T30 were the spicy vials.

 

[eternalyouth2]

I ordered 'L30' beginning of October and attached are the purity results. I think adding the filter when reconstructing should avoid any stinging issues.

 

[MiniatureSnail]

I ordered 'L30' beginning of October and attached are the purity results. I think adding the filter when reconstructing should avoid any stinging issues.

Any interest in injecting once without filtering to confirm if there is a sting, and then if there is, filtering to see if it's removed? That is the piece of this experiment we're missing. As far as I'm aware, there has been no confirmed 1st hand report of being able to filter out the sting.

Happy to be corrected if I'm wrong, and if I am, could you please provide a link - I'm interested in reading.

 

[normal]

I ordered 'L30' beginning of October and attached are the purity results. I think adding the filter when reconstructing should avoid any stinging issues.

I don't think I've seen orange cap tirz from amo, only blue caps. Gotta go check my replacement shipment but I think they're blue too.

Had anyone else seen any color variation from amo?

 

[vPepper]

Anyone having issues with amopure’s site today? Doesn’t seem to be loading for me

 

[RedSkip]

Anyone having issues with amopure’s site today? Doesn’t seem to be loading for me

Amolist.com

 

[eternalyouth2]

Any interest in injecting once without filtering to confirm if there is a sting, and then if there is, filtering to see if it's removed? That is the piece of this experiment we're missing. As far as I'm aware, there has been no confirmed 1st hand report of being able to filter out the sting.

Happy to be corrected if I'm wrong, and if I am, could you please provide a link - I'm interested in

Hmmm… I’ll have to think about that haha 😅
Maybe if I only inject like a tad of the dose without filter (test patch area) and then the rest filtered on another area? I’d consider that.

 

[MiniatureSnail]

Hmmm… I’ll have to think about that haha 😅
Maybe if I only inject like a tad of the dose without filter (test patch area) and then the rest filtered on another year? I’d consider that.

I know, it's hard to volunteer as lab rat lol. But doing that is the only way to know if filtering removes the sting.

And I'm not suggesting anyone actually do this, obviously filtering is generally considered best practice.

If you do filter and it does still sting though, definitely report back.