Amopure labor day L60 full review and usage

Sackett

New_Member
Joined
Aug 20, 2024
Messages
83
Reaction score
172
Location
USA
About to reconstitute recent order and inject RS to see if current batch of L60 burns or not.

Package received with no issues or damage. Very discrete package. Only 1 vial had a busted puck but all else looked fine. I will PH test after reconstitution and before injection . Fresh bottle of Hospira Bac to make sure no issues on reconstitution. Perfect vacuum, vaccum pulled 2ml in with no issues . Reconstitution is clear with a few bubbles. Ph looks to be a 4 maybe 5. Injection of 3mg I felt the triz on pressing the plunger maybe a 2 out of 10. Lasted 2-5 min. Sub q lateral thigh. I have an order of Cagrilintide that burns 7 out of 10 so this is good to go for now. I took this dose a few days early so I lowered the dose for science. Will report back tomorrow if i feel the effect. I currently have prescription grade mounjaro i have used for 8 weeks. It does not burn at all. Im happy so far. If i dont respond im prbly dead or busy (i have 4 daughters). (Still feel a little burn but nothing compared to cagri from astropeptide. Added lateral quad sub Q
 

Attachments

  • 954640b5c79b82e20938486c2fdad95a01972e9e.jpeg
    954640b5c79b82e20938486c2fdad95a01972e9e.jpeg
    154.4 KB · Views: 228
  • a28607f04e14f15bef29e699d59c55d5341ee904.jpeg
    a28607f04e14f15bef29e699d59c55d5341ee904.jpeg
    196 KB · Views: 197
  • 7a40ce9f50aa8b2efbf7382d10a5f4a514330a60.jpeg
    7a40ce9f50aa8b2efbf7382d10a5f4a514330a60.jpeg
    429.5 KB · Views: 212
  • 3068fd85db5541c66be42f593e55dca9b46473a7.jpeg
    3068fd85db5541c66be42f593e55dca9b46473a7.jpeg
    358.9 KB · Views: 219
  • 71ff2e955727fa6000c44537181fe105225b2c0f.jpeg
    71ff2e955727fa6000c44537181fe105225b2c0f.jpeg
    335.9 KB · Views: 237
  • ced83d353d15adaa3746cbec9237aca31da43e3e_2_750x1000.jpeg
    ced83d353d15adaa3746cbec9237aca31da43e3e_2_750x1000.jpeg
    173.3 KB · Views: 217
Last edited:
About to reconstitute recent order and inject RS to see if current batch of L60 burns or not.

Package received with no issues or damage. Very discrete package. Only 1 vial had a busted puck but all else looked fine. I will PH test after reconstitution and before injection . Fresh bottle of Hospira Bac to make sure no issues on reconstitution. Perfect vacuum, vaccum pulled 2ml in with no issues . Reconstitution is clear with a few bubbles. Ph looks to be a 4 maybe 5. Injection of 3mg I felt the triz on pressing the plunger maybe a 2 out of 10. Lasted 2-5 min. Sub q lateral thigh. I have an order of Cagrilintide that burns 7 out of 10 so this is good to go for now. I took this dose a few days early so I lowered the dose for science. Will report back tomorrow if i feel the effect. I currently have prescription grade mounjaro i have used for 8 weeks. It does not burn at all. Im happy so far. If i dont respond im prbly dead or busy (i have 4 daughters). (Still feel a little burn but nothing compared to cagri from astropeptide
Thanks so much. Question? I grabbed some test strips..new bac water from Q.. going to open new vial tomorrow. Should I test water...pep... and after recon? If so or if not.... what exactly should I be looking for far as ph??
 
Thanks so much. Question? I grabbed some test strips..new bac water from Q.. going to open new vial tomorrow. Should I test water...pep... and after recon? If so or if not.... what exactly should I be looking for far as ph??
I would test and document everything. I wanted to use the best Bac I could to rule out that as an issue if it burned. I didn't want any blam going to the bac if the product failed. I'm sure smarter individuals will chime in but staying in the 5-7 range would feel better on injection. Some have said that ph isn't a huge deal and that it may still sting due to inert ingredients. I can't speak on this due to my lack of knowledge. Just good rule of thumb is document your process and share if any issue.
 
I am wanting to take advantage of the deal amopure has going, but I don’t know what the 60 is…60 mg a bottle? I know silly question!
 
I would test and document everything. I wanted to use the best Bac I could to rule out that as an issue if it burned. I didn't want any blam going to the bac if the product failed. I'm sure smarter individuals will chime in but staying in the 5-7 range would feel better on injection. Some have said that ph isn't a huge deal and that it may still sting due to inert ingredients. I can't speak on this due to my lack of knowledge. Just good rule of thumb is document your process and share if any issue.
Thank you kindly.
 
About to reconstitute recent order and inject RS to see if current batch of L60 burns or not.

Package received with no issues or damage. Very discrete package. Only 1 vial had a busted puck but all else looked fine. I will PH test after reconstitution and before injection . Fresh bottle of Hospira Bac to make sure no issues on reconstitution. Perfect vacuum, vaccum pulled 2ml in with no issues . Reconstitution is clear with a few bubbles. Ph looks to be a 4 maybe 5. Injection of 3mg I felt the triz on pressing the plunger maybe a 2 out of 10. Lasted 2-5 min. Sub q lateral thigh. I have an order of Cagrilintide that burns 7 out of 10 so this is good to go for now. I took this dose a few days early so I lowered the dose for science. Will report back tomorrow if i feel the effect. I currently have prescription grade mounjaro i have used for 8 weeks. It does not burn at all. Im happy so far. If i dont respond im prbly dead or busy (i have 4 daughters). (Still feel a little burn but nothing compared to cagri from astropeptide. Added lateral quad sub Q
Newbie question. What’s a busted puck? And would you still use it?
 
Newbie question. What’s a busted puck? And would you still use it?
the powder in the vial is usually solid and referred to as a puck. there are some visual indications of bad lyophilization process that could mean the product will degrade faster than expected.

a broken puck is not a problem, even a little bit. it just means the vial shaken. Most finishers use mannitol but amo seems to use something a little more brittle and almost always has broken pucks.
 
New the site. - I was buying in bulk and am close to running out and all my sites are no more. Based on the posts here, maybe not all the vials from Amopure are consistent, and/or a PH precaution everyone takes? Any advice if purchasing from them? How long do shipments typically take? Appreciate any help.
 
New the site. - I was buying in bulk and am close to running out and all my sites are no more. Based on the posts here, maybe not all the vials from Amopure are consistent, and/or a PH precaution everyone takes? Any advice if purchasing from them? How long do shipments typically take? Appreciate any help.
Amo is really fast with shipping and payment is convenient because you can pay with Paypal via Alibaba Pay. Full disclosure: I have bought from them (T30 kit) but have not yet tried their product. They have an abnormally high number of complaints about stinging, but not everyone experiences it, and there are many happy customers, so it's a crapshoot. There was recently a large group test of their product and it looked good as far as purity and fill amount goes. They did fail sterility testing recently, but so did a bunch of other well known vendors. Ultimately you have to come to grips that you're buying from Chinese black market drug dealers and this isn't going to be the telehealth/compounding pharmacy experience that many are used to.
 
Piggy backing off of this.

Ordered L30 last month. Reconstituted tonight with 2ml bac water. There was some stuck to the side of vial at first but went away after rolling and leaving it alone for an hour. Vacuum was there.

Used a syringe filter and transferred to new sterile vial.
I think the Amo stopper sucks. You can see where I punctured it each time. Can't see anything on the new vial. I used a 25g, 1.5 inch needle. Think it would be worth it to transfer to a new vial whether or not you use a filter. I'd be worried about dulling the needle and tunneling with the Amo stopper.

RS only got 4 units today, but NO stinging. Will be giving RS 14 units on Sunday so will update if there is stinging then or not. Will also update later in the week for effectiveness.
 

Attachments

  • Screenshot 2024-10-04 at 1.08.52 AM.png
    Screenshot 2024-10-04 at 1.08.52 AM.png
    901.1 KB · Views: 103
  • Screenshot 2024-10-04 at 1.09.21 AM.png
    Screenshot 2024-10-04 at 1.09.21 AM.png
    592.3 KB · Views: 101
  • Screenshot 2024-10-04 at 1.09.41 AM.png
    Screenshot 2024-10-04 at 1.09.41 AM.png
    657.5 KB · Views: 104
  • Screenshot 2024-10-04 at 1.10.14 AM.png
    Screenshot 2024-10-04 at 1.10.14 AM.png
    678.3 KB · Views: 98
Piggy backing off of this.

Ordered L30 last month. Reconstituted tonight with 2ml bac water. There was some stuck to the side of vial at first but went away after rolling and leaving it alone for an hour. Vacuum was there.

Used a syringe filter and transferred to new sterile vial.
I think the Amo stopper sucks. You can see where I punctured it each time. Can't see anything on the new vial. I used a 25g, 1.5 inch needle. Think it would be worth it to transfer to a new vial whether or not you use a filter. I'd be worried about dulling the needle and tunneling with the Amo stopper.

RS only got 4 units today, but NO stinging. Will be giving RS 14 units on Sunday so will update if there is stinging then or not. Will also update later in the week for effectiveness.
Can you share where you purchased your sterile vial, syringes, and needles to transfer/filter?
 
Can you share where you purchased your sterile vial, syringes, and needles to transfer/filter?
West End Medical for vials and 3ml leur lock syringe with 25g 1.5 inch needle, Peptide Test for filters. If you plan on reconstituting a lot, I'd buy needle and syringe separately since you'd waste a syringe every time. I'm debating whether or not to save the extra syringe
 
I have been looking for European vial sellers but super hard to find sterile ones expect for Amazon which I don’t fully trust. Any recommendations on that?
 

Trending content

Forum statistics

Threads
1,725
Messages
26,941
Members
3,296
Latest member
PeroPep
Back
Top