Your SSA Experience…

[desinr-gal]

I would like feedback about the vial quantities. Their recently posted Coa results were high but their amounts were less than stated, for everything tested that I looked at. The 4mg reta was 3.6 the 12mg tirze was 11. (my remembrance is not exact) but they were less than stated by a margin that would mess with dosages. Or am I interpreting the results incorrectly?
Is there a chance that their vials and plugs have a consistent weight, so after recon and transfer into a new vial, one could be weighed to arrive at a consistent tare weight for calculation?

 

[zpped]

Is there a chance that their vials and plugs have a consistent weight, so after recon and transfer into a new vial, one could be weighed to arrive at a consistent tare weight for calculation?

No. This is cannot be done for a ton reasons. Starting with a single drop of water weighs ~50mg. The vast majority of the vial content isn't even peptide. There is no way to filter out the noise.

 

[indolent]

Is there a chance that their vials and plugs have a consistent weight, so after recon and transfer into a new vial, one could be weighed to arrive at a consistent tare weight for calculation?

If I understand what you're seeking--producing accurate doses when tested vial's mass differs >10% from nominal amount--determine your intended liquid amount (10 to 50 units is usually best, coinciding with a numbered tick on the syringe) and use the reverse calculator in my signature. A mg to mcg converter is towards the bottom.

 

[exploitedworkerbee]

I placed a 700$ order July 14th, got tracking on July 18th.....tracking updated on the 26th and I received package yesterday July 28th.

I ordered with Tansy. I ordered during their promo and I could tell from there crypto wallet transfers that they had been busy so I expected there to be some delay in communication.

Looking to order again soon.

This is the approach and attitude everyone should model themselves after.

 

[forkknife]

I placed an order and paid on 7/13, US tracking number received on 7/16, it hasn't had any updates since 7/15. I messaged my sales rep about it a few days ago and she indicated that she checked with the freight center and "the package is waiting for the flight" and sent a screenshot of some updates from the Chinese tracking site, but she hasn't been willing to provide the Chinese tracking number to me. Has anyone else experienced delays like this recently?

 

[zpped]

I placed an order and paid on 7/13, US tracking number received on 7/16, it hasn't had any updates since 7/15. I messaged my sales rep about it a few days ago and she indicated that she checked with the freight center and "the package is waiting for the flight" and sent a screenshot of some updates from the Chinese tracking site, but she hasn't been willing to provide the Chinese tracking number to me. Has anyone else experienced delays like this recently?

I wouldn't worry about it until it hits 30 days. Then ask for a reship if it hasn't arrived.

 

[forkknife]

I wouldn't worry about it until it hits 30 days. Then ask for a reship if it hasn't arrived.

Thank you!

 

[desinr-gal]

If I understand what you're seeking--producing accurate doses when tested vial's mass differs >10% from nominal amount--determine your intended liquid amount (10 to 50 units is usually best, coinciding with a numbered tick on the syringe) and use the reverse calculator in my signature. A mg to mcg converter is towards the bottom.

If I understand what you're seeking--producing accurate doses when tested vial's mass differs >10% from nominal amount--determine your intended liquid amount (10 to 50 units is usually best, coinciding with a numbered tick on the syringe) and use the reverse calculator in my signature. A mg to mcg converter is towards the bottom.

So when you buy and the vial amount is assumed to be off; do you just recon as if it were what it was supposed to be, or do you micro adjust according to tested vials and assume it'll be similar?

 

[indolent]

So when you buy and the vial amount is assumed to be off; do you just recon as if it were what it was supposed to be, or do you micro adjust according to tested vials and assume it'll be similar?

If it differs by more than 10%, I'll always use the test result for mg in recon calculation. If less than 10% off, I either use what it's supposed to be, or the test result mg amount. Usually the latter, because I like my pinning to be right at a convenient numbered tick on the syringe ... so I use the reverse calculator anyway, and might as well be exact about it.

 

[Mustafa]

I purchased a lot of product from SSA late April. It took five weeks for one package to arrive and sick for the second to arrive. Overall I'm very pleased with everything I have purchased. My relatives and I have the same hunger management using their sema and cagri as QSC.

It seems that thanks to Mr. Cheeto, everything will take longer to arrive.

 

[gippo]

Anyone purchase their 5-amino-1mq 10mg vials? I just got mine but they haven't gotten a test report.

 

[McFox]

I placed 3 orders with SSA and never had a problem, sometimes shipping is fast sometimes slower.
I use Moon and Tansy.

Just placed my first order with moon, got a tracking nr next day after payment. No tracking data yet, hope to see something until next tuesday. I've been told shipping should take a week only during EU warehouse stock.

 

[yobculture]

It seems that thanks to Mr. Cheeto, everything will take longer to arrive.

This is why I’m only ordering domestic now. It’s just not worth the risk. I recently ordered from SSA’s US “warehouse” (lol) and it was worth the extra charge. My order came in less than a week and I didn’t spend weeks worrying if I was going to get my peptides confiscated.

 

[cheaperseeker]

I placed my order on 7/19 and it just arrived via USPS today, 8/1. Everything I ordered is there.

 

[McFox]

I can barely believe how fast my order got executed!

If tracking is correct, I will receive my order within the next 12h, my first contact with moon was less than 48h ago. If the contents of the box are good now too, then I'm surely sticking to this vendor.


Edit: package arrived: t30 red caps mfg may 19 2025, stuff arrived faster than the accessories ordered the same day from a local shop :'D

 

[forkknife]

I can barely believe how fast my order got executed!

If tracking is correct, I will receive my order within the next 12h, my first contact with moon was less than 48h ago. If the contents of the box are good now too, then I'm surely sticking to this vendor.


Edit: package arrived: t30 red caps mfg may 19 2025, stuff arrived faster than the accessories ordered the same day from a local shop :'D

Did you order from the US warehouse? My tracking still hasn't updated and I ordered about three weeks ago 😒

Does anyone know if I should be concerned about products degrading in the heat during transit?

 

[McFox]

Did you order from the US warehouse? My tracking still hasn't updated and I ordered about three weeks ago 😒

Does anyone know if I should be concerned about products degrading in the heat during transit?

Nope, EU.

 

[Calm Logic]

Does anyone know if I should be concerned about products degrading in the heat during transit?

It's fine:

Search results for query: Jano garage

glp1forum.com

 

[vewdew34]

I placed an order and paid on 7/13, US tracking number received on 7/16, it hasn't had any updates since 7/15. I messaged my sales rep about it a few days ago and she indicated that she checked with the freight center and "the package is waiting for the flight" and sent a screenshot of some updates from the Chinese tracking site, but she hasn't been willing to provide the Chinese tracking number to me. Has anyone else experienced delays like this recently?

Yes my first order with SSA took 32 days due to flight issues, 2nd order took 14 days and my 3rd one just left China after 1 week waiting for a flight.

 

[vewdew34]

Did you order from the US warehouse? My tracking still hasn't updated and I ordered about three weeks ago 😒

Does anyone know if I should be concerned about products degrading in the heat during transit?

Check 517track, but you have to translate page from Chinese to English.

 

[forkknife]

Check 517track, but you have to translate page from Chinese to English.

Thanks, this gave me more info than 17track. My package is still in Hong Kong it looks like.

"The goods have arrived at the port and are waiting for the flight to be arranged."

 

[forkknife]

I placed an order and paid on 7/13, US tracking number received on 7/16, it hasn't had any updates since 7/15. I messaged my sales rep about it a few days ago and she indicated that she checked with the freight center and "the package is waiting for the flight" and sent a screenshot of some updates from the Chinese tracking site, but she hasn't been willing to provide the Chinese tracking number to me. Has anyone else experienced delays like this recently?

Just as an update, I am still waiting on this package. 517track has been helpful. Looks like it finally made it to the US and is clearing customs (hopefully).

 

[Peptoidian]

I've placed multiple orders with them. The most recent (received today) took 14 days to arrive from China. No customs/tariff issues. Product was as ordered and matched COAs. I'm happy with their service.

 

[vewdew34]

I've placed multiple orders with them. The most recent (received today) took 14 days to arrive from China. No customs/tariff issues. Product was as ordered and matched COAs. I'm happy with their service.

I never add any problems with SSA and will continue to order from them.

 

[juGGaKNot]

I placed a 700$ order July 14th, got tracking on July 18th.....tracking updated on the 26th and I received package yesterday July 28th.

I ordered with Tansy. I ordered during their promo and I could tell from there crypto wallet transfers that they had been busy so I expected there to be some delay in communication.

Looking to order again soon.

Funny story, i was posting on reddit a couple of days ago and someone PM me with a cheap source for tirz, Tansy. So i search here on the forum and SSA pops up. I tell him that's it's listed here and looks legit but he has no idea. He was just ordering from tansy because its cheap.

The reason I won't order again from SSA (until they fix it) is that they have no discipline regarding batches. The same cap color (on tirzepatide, but probably everything) continues for months and months, with the "Mfg: MM DD YYYY" changing monthly. That makes testing absolutely pointless and impossible. Additionally, they publish what they refer to as 3rd-Party CoAs, but they're potentially cherry-picked 2nd-Party CoAs. Making them 100% useless. They ignore suggestions to remedy their batching identification.

That said, I ordered through Ray from the China warehouse, got tracking quickly, and had to nag a bit while no movement showed on it. After nearly a month, Ray replied that the order was seized by Customs and reshipped. The reship came quickly. The tirz is in my hoard and will have to be a "feels" kit, which I'm not thrilled about.

So close and yet so far.

Agree completely. Even my SSA rep admits that mfg. dates and cap colors are completely meaningless. It then follows that vendor-provided COAs are also completely meaningless.

My take is that SSA has tons of product and will sell it until it's gone, even if that takes years. Without any possible way to know when the product was made or what batch it likely belongs to, testing is meaningless and you may be getting newer product or it could be 2 - 3 years old.

The only option is to test every single kit and even then you could have old and new product mixed together (even my rep admits this is a possibility). I am also staying away until they provide more transparency.

My biggest concern with this is who am I actually buying SSA-produced mix-and-match-batch products from without knowing about it.👀

Wait, does this mean if i order 2 kits at the same time they might be from different batches and i would have to test them separately ?

I don't trust group testing and want to test everything myself so this would be terrible. Does SRY have the same problem ?

 

[zpped]

Wait, does this mean if i order 2 kits at the same time they might be from different batches and i would have to test them separately ?

I don't trust group testing and want to test everything myself so this would be terrible. Does SRY have the same problem ?

This is a possibility with every vendor. But it's not likely.

 

[CallieKat]

I never updated y’all. I got my stuff from Tansy. It was smooth. My first overseas since everything got weird early this year. Still trying to stay domestic though.

 

[Maximus]

I never updated y’all. I got my stuff from Tansy. It was smooth. My first overseas since everything got weird early this year. Still trying to stay domestic though.

I've read that Tansy is on the ball. I'm considering ordering with him/her.