FartfulCodger
GLP-1 Enthusiast
Exactly. You've gotta see-saw that plunger to get out every last drop!
Putting Air in the syringe and into your vial.
- Thread starter Whiynot20026
- Start date
minipepbeast
GLP-1 Apprentice
I mean nurses are taught to pull air into the syringe on day 1 in nursing school.
randompersonrandom
GLP-1 Specialist
This is one of dozens of reasons I went to pens really early on, and was glad my mom came to the same conclusion for her own stuff. No air, and no vacuum to fight.
I only recon in front of my flow hood, so all air going into a vial is clean.
I use pens as well.
BNLFL
GLP-1 Specialist
Do it. I never did till I started 6 vials ago. It really doesn't take much longer.
I didn't used to inject air. And one some vials I would literally watch air bubbling in from a previous needle puncture as I was drawing out the next dose.
I now use pens, and inject air into the vial, then filter the 'tide into the cartridge, making the whole thing a non-issue.
YMMV.
I now use pens, and inject air into the vial, then filter the 'tide into the cartridge, making the whole thing a non-issue.
I pointed this out a few weeks ago, in reference to that Fishermandude's post about never changing needles. I was talking to a 30+ yr nurse. NOBODY outside of the psycho-pep cult of doom is changing needles every shot on their own personal injections. According to her.
YMMV.
That just doesn't sound right 😛. Are you saying they are drawing and injecting multiple shots with the same needle?!
I do not inject air just because I don't need to.
You seem to be considering a very narrow use case. One that doesn't even apply to the current thread. The OP was about injecting air into a vial before drawing. Are you saying that drawing a substantial amount from a vial will not create a vacuum, which may make it difficult to draw (if not impossible)? Well, it does.
You can inject air or vent the vial. Either way, the air is getting in.
Builderman
GLP-1 Apprentice
Personally I don’t test my stuff after I start using is, just basically inject until it’s cloudy. But never had an issue with anything clouding up before a reasonable time.
I think he's saying that a new sterile, empty vial he adds a vent with filter on it and when he injects the liquid from the 1st vial, it's just pushing OUT the air that was inside.
He's not introducing air in his example. He's removing whatever was there to begin with.
Now, when he does that, his new vial won't have a vacuum on it so he shouldn't need to push air into a vial using his "move stuff to a new vial" method.
I think.
Yes - initially, no. But as you draw from it, it will create a vacuum. Depends on how much you are drawing.
yup. Contextual note, I'm pretty sure she was referring to multiple-use autopens, similar to the manual pens that are common in our world. Not re-using a single-use diabetic syringe.
(puts on flame suit) I didn't bring enough needles to my remote location where I'm stationed for the next few months, and so now I'm "one of those" that don't change the needle on my pen every injection.
Whiynot20026
GLP-1 Apprentice
The cloudiness or particles intrigues me. I’ve got a few peps I’ve been using for three months and they both look great. Tirzep mainly. How long has it taken you to get a cloudy vial. I have a few friends that have been using the same vial for six months. I know everyone has an opinion on this and I think the grey market crowd does not have this issue. It’s the crowd that bought a 3 month pre mixed vial from a compounder and we paid 5x for it and we just can’t let it go. It’s funny how the learning and experience is almost identical for most here in this forum.
Bill
Builderman
GLP-1 Apprentice
I typically run out of my Reta around week 8. Never been cloudy at that point. If I was taking lower doses I’m sure it would last longer though, I just run out of the compound before it clouds up.
RetCurious
GLP-1 Enthusiast
There's a test running on another server with air injected into vials with BAC daily that has shown no problems. That is the whole point of BAC.
Whiynot20026
GLP-1 Apprentice
I believe you. But there a few that disagree. They say BAC water can’t prevent bacteria from forming. Only help. But bacteria can form in BAC water. I don’t have an issue adding air.
Bill
skaylife
GLP-1 Enthusiast
I have just made a simple video to let you see if air contamination really exists or not? Device counts bad particles in the air at standard room conditions with stable air flow. It is just a comparison next to a laminaire flow hood and in front of it. Counter can tell particles bigger than 2.5micron and hepafilter of the hood is 2micron. Decide yourself just by clicking on the link
Bad particles counter
It is on my google drive. Probably you have to download it first to see. It is an .mp4 video
Bad particles counter
It is on my google drive. Probably you have to download it first to see. It is an .mp4 video
Last edited:
skaylife
GLP-1 Enthusiast
It is just to use the content immidiately. Not to leave air in the vial for a long time and they also learn at first day, not to leave any air in the syringe, before they inject it, not?
skaylife
GLP-1 Enthusiast
I think it is about pen usage with the same needle for a couple of times. No need to take risks for such a low cost, though some people do it. I gave klow to a friend in a pen together with 20 needles and told him to use a new needle each time. You can order it online or just go to a pharmacy and buy needles for mounjaro pen without any questions, I said. After 4 weeks he had 15 needles over out of 20. No problems at all, he says. To use good practices, he must get problems first. Nothing to do at all than hoping that he doesn't get any issues.
BNLFL
GLP-1 Specialist
As I mentioned, I only push air into vial that I draw shots from. When reconstituting into a new empty vial, I vent to help filling the 2-3ml of reconned peptide in the new vial. Otherwise, sometimes it's hard to pull the liquid into the pin syringe. Zippy even mentioned this a while back.
Great video! I love my flow hood! I use it for all sorts of fun hobbies.
BNLFL
GLP-1 Specialist
Did you get that from Amazon? I was looking at one that looks similar.
What are the specifications of your equipment? I can't see the hood in the video: do you have a wider view?
skaylife
GLP-1 Enthusiast
No. I made the laminaire flow hood myself for less than €100. All material including particles counter bought from ikea at the department where they sell air ionisers and cleaners. Only 12V adaptor with potentiometer for reulating fan speed and PC fans were from Aliexpress. Reason behind making it self is not the cost. But the challenge behind making itself and seeing that it works. But I have checked the link you gave. It looks greate for the price and it will sure do the job.
