Anyone buying from ERP

Tabletalk said:
I contacted them, twice about the cap and then again when it wasn't effective. They were no help, stating "It’s possible that variables within your current research protocol may be influencing the results you’re observing." I used the same BAC I've used on my other Reta from them and the next vial two days later (from them), was effective.
Click to expand...
I'd ask for a replacement since the others were OK. Stuff happens. If they're a good firm they'll take care of ya. If they won't I'd let 'em know you'll not use them again ( they could care less, I'm sure ) and that you're going to let others know of your experience.
That's me, anyway. You do you.
 
JoonyO said:
Why don't I get the feeling this is a wise thing to dilute my SLU with? smh
Click to expand...
Acetic acid is nothing to fear. For injection it’s 0.6% sterile solution. Not too pricey and easily available. I’m running IGF-LR3 and that’s reconned with AA. I use a 1 ml syringe, draw up my 10-20 units, then draw about four times that amount of BAC to buffer the potential acidic burn.

I have seen others post that they don’t experience a burn even without buffering.
 
latviantower said:
Acetic acid is nothing to fear. For injection it’s 0.6% sterile solution. Not too pricey and easily available. I’m running IGF-LR3 and that’s reconned with AA. I use a 1 ml syringe, draw up my 10-20 units, then draw about four times that amount of BAC to buffer the potential acidic burn.

I have seen others post that they don’t experience a burn even without buffering.
Click to expand...
Hmm. Thanks for elaborating. So it's added TO BAC to help dissolve...not just THE ONLY SOLUTION you use. It's a mix of both- 1 parts to 4. OK. That's kind of not so bad sounding now. THANK YOU! 🤓🙏
 
JoonyO said:
Hmm. Thanks for elaborating. So it's added TO BAC to help dissolve...not just THE ONLY SOLUTION you use. It's a mix of both- 1 parts to 4. OK. That's kind of not so bad sounding now. THANK YOU! 🤓🙏
Click to expand...
Sent you clarifying DM
 
My order from ERP arrived today, ordered and paid 11.12. shipped 11.14. arrived 11.20. in germany.
Very fast and well packaged. Ordered T30, RT10, and free bac water because of Alipay. Got T30 RT12 and the Bac. On my point I can absolutely recomend the seller.
I do not put in the tracking part in germany.
 

Attachments

  • IMG_0377.jpeg
    IMG_0377.jpeg
    213 KB · Views: 60
  • IMG_0378.jpeg
    IMG_0378.jpeg
    171.5 KB · Views: 46
  • IMG_4283.jpeg
    IMG_4283.jpeg
    4.1 MB · Views: 56
  • IMG_4284.jpeg
    IMG_4284.jpeg
    2.3 MB · Views: 61
Ordered Nov 9, tracking Nov 11, arrived Nov 25. Orange top T30 from Louise, 2nd order from ERP. Won’t be using ERP stuff for awhile, so can’t speak on the feels, but good CN ship time and customer service so far 👍
 

Attachments

  • IMG_1008.jpeg
    IMG_1008.jpeg
    2.2 MB · Views: 13
latviantower said:
Acetic acid is nothing to fear. For injection it’s 0.6% sterile solution. Not too pricey and easily available. I’m running IGF-LR3 and that’s reconned with AA. I use a 1 ml syringe, draw up my 10-20 units, then draw about four times that amount of BAC to buffer the potential acidic burn.

I have seen others post that they don’t experience a burn even without buffering.
Click to expand...
How do you like lr3? Are you doing it IM or subq?
 
swimmer said:
How do you like lr3? Are you doing it IM or subq?
Click to expand...
I wouldn’t call it a game changer, my trainer thinks it’s helping, though. I do both IM and subq - I’ll do it bilaterally IM in biceps or delts immediately post workout. On rest days it’s subq upon waking (fasted).

I can feel the last part of the push - little vinegar burn going in but I just rub the alcohol pad over the spot and it’s done.
 
Just finished the payment process using Alibaba with ERP Emmy. They are doing their best it seems. Waiting for the delivery numbers.
 
I ordered on November 19th and received yesterday the 29th. Everything looked good with the order and was very helpful ordering. Little confusion sending the correct crypto as she kept sending USDT instead of USDC but got it worked out pretty quickly.
 
RuggerPanda said:
I ordered on November 19th and received yesterday the 29th. Everything looked good with the order and was very helpful ordering. Little confusion sending the correct crypto as she kept sending USDT instead of USDC but got it worked out pretty quickly.
Click to expand...
Yea I dont know that any of them have a really good grasp on English. They do alright, but there's obviously some communication barriers
 
I ordered on Nov 17, got tracking on the 19th and it is now dec5 with no package. Much lonegr than I was hoping for. Alberta Canada
 
ERP is good to go. Emmy was great, will definitely order again.

Don't worry too much about the time. It's holiday season. Plus, gray typically is 2-4 weeks.
 
Have had a super great experience with Louise / ERP. Ordered roughly 40 kits on 11/24 and had a tracking number within 3 days. Packages were deliverd on 12/3 and 12/4. 11 days total from payment to the order in hand. Communication has been top-notch. I've sent samples in for testing and will provide those COAs when received - Louise has assured me that everything is guaranteed and I'm 100% confident in that guarantee. I'll definitely order from ERP again!
 
I can confirm the super fast shipping and good customer service. The US warehouse got me my order in like 4 days! That was faster than Nexaph - I don’t know if they can take credit for the good luck I’ve had on shipping times, but it’s been a real pleasure so far 💯
 
Here’s been my experience with ERP. It’s not as much of a glowing review as those above. It’s not terrible, but it’s enough to make me shop elsewhere.

Order 2 kits of a product and specifically requested it be shipped from the US warehouse, which they had been advertising heavily. Ordered 11/15, paid 11/15. Was told I’d get a tracking number within 48 hours. Didn’t hear back, so I requested it on 11/18 and received a quick reply with the tracking number but a mention that it wouldn’t show up for a while because it hadn’t been received by the international shipping company. I was very specific about only wanting product from the US warehouse (for my own reasons), so I asked what the deal was. Linda replied that the US shipment got hung up in customs so she shipped it from China. Package arrived 11/28, but it was only 1 kit. Already tired of the back and forth, I just asked for a refund for the product I didn’t receive. They asked if they could issue a reshipment from the US warehouse with a delivery in 3-5 days, so I said sure. A single kit arrived today (12/6) and it’s got different colored caps from the first kit (and there’s no vendor COA listed for this product with these caps). I’ve asked for the matching COA and I still need to send a vial from each kit out for testing, but I don’t really trust what I’ve got.

For my first order from them, which was intentionally a small, simple test run, it wasn’t as smooth as I was hoping. Communication has been reasonable and I did eventually receive 2 kits of something, so assuming it’s the right thing, I can’t knock the customer service too much. But I’m probably not going to order from ERP again in the immediate future. Lots of suppliers out there, all with their pros and cons. I’m digging the J5 experience pretty well so far.

Pic of the kit from the US warehouse just because…
 

Attachments

  • IMG_1520.jpeg
    IMG_1520.jpeg
    1.7 MB · Views: 17
Dos-Dox said:
A single kit arrived today (12/6) and it’s got different colored caps from the first kit (and there’s no vendor COA listed for this product with these caps). I’ve asked for the matching COA and I still need to send a vial from each kit out for testing, but I don’t really trust what I’ve got.
Click to expand...
Edit to add: Linda confirmed that they are different batches and the blue kits from the US warehouse aren’t being sent for testing and don’t have a COA. So getting 2 different batches for such a small 2-kit order ensures I have to send a vial from each kit for testing, which increases the cost and hassle factor. (Obviously I could also just say F-it and use it without any test (unlikely) or toss it and buy elsewhere and probably come out ahead expense-wise.)
 
Dos-Dox said:
Edit to add: Linda confirmed that they are different batches and the blue kits from the US warehouse aren’t being sent for testing and don’t have a COA. So getting 2 different batches for such a small 2-kit order ensures I have to send a vial from each kit for testing, which increases the cost and hassle factor. (Obviously I could also just say F-it and use it without any test (unlikely) or toss it and buy elsewhere and probably come out ahead expense-wise.)
Click to expand...
Oof, my china order has been out since... the first? I dont think id order from them again after reading your experience
 
You must log in or register to reply here.

Trending Topics

Latest Posts

Members Online

Total: 248 (36 Members & 212 Guests)

Forum Statistics

Threads
7,507
Posts
90,153
Members
22,228
Newest
Happynewme

Share This Page!

Top Bottom