MOTS-C ISRs

gothpeacock

New_Member
Joined
Aug 6, 2024
Messages
32
Reaction score
40
Location
US
I love what MOTS does for my energy and strength during lifting. What I don’t love is the itchy lumps it often leaves for days. 😭 I’ve tried MOTS from 3 different vendors at this point: QSC, TCI and PGB.
Q mots was the worst - burned immediately after pinning and the longest persisting lumps. TCI was the mildest for me with ISRs. Recently got some PGB stock and while the effects are great I’m back to dealing with lumps under the skin. Considering offlloading the kits I got and going back to TCI. 😭 does anyone else struggle with the ISRs from this specific pep?
 
How much are you diluting it? I mix so that 5mg is 50 units. That gives me an 'acceptable' burn using MOTS-C from QSC. I tried concentrating it to 5mg in 20 units. That was not fun.
 
I love what MOTS does for my energy and strength during lifting. What I don’t love is the itchy lumps it often leaves for days. 😭 I’ve tried MOTS from 3 different vendors at this point: QSC, TCI and PGB.
Q mots was the worst - burned immediately after pinning and the longest persisting lumps. TCI was the mildest for me with ISRs. Recently got some PGB stock and while the effects are great I’m back to dealing with lumps under the skin. Considering offlloading the kits I got and going back to TCI. 😭 does anyone else struggle with the ISRs from this specific pep?
I have pgb mots from December and I took get lumps.
 
How much are you diluting it? I mix so that 5mg is 50 units. That gives me an 'acceptable' burn using MOTS-C from QSC. I tried concentrating it to 5mg in 20 units. That was not fun.
You make a fine point, maybe I should dilute it more - currently I add 1ml to a 10mg vial which makes my 5mg doses 50 units…i don’t love the idea of making the injection more units but if it prevents the lumps…
 
Ssa motsc seems good. I mix 0.5ml into 10mg and take the whole thing. It itches but doesn't leave a bump
 
I only add .5ml BAC to Cain's and no ISR's, even injecting the entire 10mg vial into the glute. I did notice ISR's when pinning 5mg of PGB's into my thighs but only lasted about an hour or so. I may switch back to PGB next week to see if I notice a difference.
 
When I injected 1ml I had horrible ISR every single time. Next vial I decreased it so my dose was with 0.25ml - I did it very slowly and had no stinging or ISR.
 
Using PGB Mots-C, 2 ml for 10 mg, so 50 units for 2.5 mg dose. It burns and itches for an hour or two and then goes away but leaves a visible bump for a few days. Diluting it more might help.
 
I also add some air to syringe and flick it so the air bubble is next to the plunger. I read somewhere that the ISR might be from the last drop or two when you withdraw the needle.

I pin again tomorrow and will dig some PGB out of the freezer to see if I get a different reaction than the Nexaph. I will also check the PH to see if it might be the reason for so many people reporting ISR's.
 

Trending content

Forum statistics

Threads
2,428
Messages
43,384
Members
4,352
Latest member
Christy7774
Back
Top