Nexaph First Purchase - Retatrutide

Status
Not open for further replies.
Thank you!

So my understanding at this point that this a quasi-qualitative/quantitative test for non-specific microorganisms. However, since it doesn't tell you what type of microorganism present I do not quite see value in it. What is the threshold? Who determines it? What is an acceptable number and what is not, especially, not knowing what exactly one is dealing with.

It just seems like a total fad to me that makes additional revenue for the testing companies. I see no value in it especially since majority of people here know pretty well that paying so little for the GLPs comes with a certain risk. I would be more concerned if there was a specific microorganism they were testing these for, amount of which in the sample would cause a trip to an emergency room.

Just my 2 cents. Thanks again though! 🙂
Personally, after seeing the moldy little petri dishes that developed in some of the tests, I think there is value in this basic type of test. It makes me feel good to know if it's a Pass, because that is ruling out all kinds of contamination. It's not perfect, but it's better than nothing. I think the important thing is for everyone to understand what these tests do and do not tell us, and then act accordingly - both in terms of participating in testing, and in making decisions based on test results. Plenty of people are still injecting the products that failed the sterility tests, though some are now filtering them (which is a whole other rabbit hole).
 
I just looked for the price list and it’s not showing Reta on their site 😢
They sold out, Cain has a telegram group and said it should be back in about a week, it's in production now along with Cagri.
 
So Peppys is definitely a navigational challenge. The #spc thread shows a fail for #shanghaipharma with test by Jano. I happened to find a post under #nexapharm that shows a second test was done by an individual from the same GB. She sent her vial(s) individually to Peptide Test and the test passed. The CoA for that test is actually posted there. I am somewhat new to this and hope my finding the other hashtag is helpful to those looking for more info. Thus it appears that within the GB there were inconsistent results.
Yes this was a different type of test from a different test vendor, and created even more controversy. Be glad that you missed the drama. 🙄
I think it's good for people to be aware of sterility fails and to act accordingly. I'm still planning to try out Nexa because the rep is responsive and the ordering is easy, I appreciate the batch-specific COAs and the reported quick ship. Seems way better than QSC who I have to send a message to 5 times before usually giving up 😆

EDIT: I was young and stupid
 
Last edited:
Can you share the vial dimensions? I just placed an order with Nexa and am wanting to order a Niimbot label maker and labels so I can stay organized. But I have no idea what size labels I'd need.
 
Can you share the vial dimensions? I just placed an order with Nexa and am wanting to order a Niimbot label maker and labels so I can stay organized. But I have no idea what size labels I'd need.
The 12x40 that come w/ the niimbot D11 (assuming thats what you got) should be fine, I like the clear round ones for the tops too. https://www.amazon.com/gp/product/B0C5SN4J1T
 
The fact that I haven’t seen any crazy issues on any of these grey GLP’s is pretty reassuring in general. I figure there’s been… I don’t know, millions of injections total? And I haven’t seen like any crazy injection site infection pics or anything. I’ve only been on the scene like 3 months and I know hearsay isn’t science but things seem pretty controlled and safe overall whoever is making these things at the source level.
It wasn't "crazy injection site infection" I guess but here is a link to a couple posts from me back in July talking about injection site issues. At the time I thought it might have been the BAC water but now I believe it was most likely non sterile contaminated peptides. I have now used more than a dozen vials of various peptides and this was the only one to ever be an issue. It caused huge burning/stinging and injection site inflamation/welts that lasted for 3+ days. I used cortisone cream on it to make it almost bearable.🤣 I had been using research peptides for a month or two by then and had never had this before or since. I wish I had taken pics for you. 😉 😂
Because money was tight at the time and I couldn't afford to buy more (I was getting domestic single vials at time), I refused to throw it out and used it for weeks...🤷‍♂️
Figured since the swelling eventually went down I would survive
https://glp1forum.com/threads/noob-question.639/post-5369
https://glp1forum.com/threads/noob-question.639/post-5379

The following link just covers my procedure for testing BAC before using each time...in case anyone is interested. I would also test the mixed peptide for PH if it stings/burns. I am pretty sure that PH issues would be much shorter in time than this was...which is why I am pretty darn sure it was contaminated.
https://glp1forum.com/threads/amopeptide.359/post-8263
 
Order Update...

Ordered GHK-cu on Thursday Sept 19 @ 1:25pm
Shipped out that night....
Received package on Saturday Sept 21 @ 11:33am
Soooooo........ ~46 hours from completing order to delivery to Ohio 😍

SPC_GHK-cu.jpg

Great packaging
Only negative at least until RS tests it is that the QR code takes you to their website and it says

Coming Soon
Testing Coming Soon
Please check back at another time

So don't care for the fact it directs to their website instead of a 3rd party independant site and also the fact that the test isn't already there...but these are minor complaints to me. Sure it will be even better moving forward.
👍
 
Order Update...

Ordered GHK-cu on Thursday Sept 19 @ 1:25pm
Shipped out that night....
Received package on Saturday Sept 21 @ 11:33am
Soooooo........ ~46 hours from completing order to delivery to Ohio 😍

View attachment 2101
Great packaging
Only negative at least until RS tests it is that the QR code takes you to their website and it says

Coming Soon
Testing Coming Soon
Please check back at another time

So don't care for the fact it directs to their website instead of a 3rd party independant site and also the fact that the test isn't already there...but these are minor complaints to me. Sure it will be even better moving forward.
👍
Ha ok that is good to know. Hopefully they actually put the tests up not too long after. I'm not surprised it's on their site and not a third party, but you can always verify it by looking it up on Jano (not sure about the other test providers but I assume it's the same). I have the feeling they've prioritized testing for GLP-1s and cagri, since those are probably most popular.
 
Order Update...

Ordered GHK-cu on Thursday Sept 19 @ 1:25pm
Shipped out that night....
Received package on Saturday Sept 21 @ 11:33am
Soooooo........ ~46 hours from completing order to delivery to Ohio 😍

View attachment 2101
Great packaging
Only negative at least until RS tests it is that the QR code takes you to their website and it says

Coming Soon
Testing Coming Soon
Please check back at another time

So don't care for the fact it directs to their website instead of a 3rd party independant site and also the fact that the test isn't already there...but these are minor complaints to me. Sure it will be even better moving forward.
👍
That's a shame Pep. The QR Code on my Reta 15mg kit works perfectly.

In checking dates I find that I ordered on the 16th of September, and, Janoshik performed the COA only 6 days earlier.

Seems likely to me that the filled vials are labelled with a blank prospective QR Code. This placeholder QR becomes a valid link once Janoshik posts his COA. It would be interesting to know how many days elapse before your proper COA appears 🙂
 
I've just received my kit of 12mg Retatrutide from Shanghai Nexa Pharmaceuticals.
Ordered Monday morning at 8:19am and delivered in 3 days and 4 hours from their US depot.

EXCELLENT packaging and the KIT LABEL COMPLETE WITH JANO COA HYPERLINK !
Use your phone camera on the jpg - it WORKS QUICKLY.

This is a first from a Chinese Vendor in my experience and a trend that I hope and expect to develop quickly.

View attachment 2047
Have you added this vendor to your to your approved vendor list or is it too soon?
 
Yes this was a different type of test from a different test vendor, and created even more controversy. Be glad that you missed the drama. 🙄
I think it's good for people to be aware of sterility fails and to act accordingly. I'm still planning to try out Nexa because the rep is responsive and the ordering is easy, I appreciate the batch-specific COAs and the reported quick ship. Seems way better than QSC who I have to send a message to 5 times before usually giving up 😆
Oh man. The learning never ends! I am waiting what may be an unusually long time for an Amo order, so I may give Nexa a try too. QSC is on my list, but I have not gone down the crypto rabbit hole just yet. Nexa offers 2 day shipping for a crazy low price.
 
Order Update...

Ordered GHK-cu on Thursday Sept 19 @ 1:25pm
Shipped out that night....
Received package on Saturday Sept 21 @ 11:33am
Soooooo........ ~46 hours from completing order to delivery to Ohio 😍

👍
I ordered on the 19th also but got this message yesterday and the package appears to have never left Hammond, IN today yet? If it was the mail, I would totally have expected it but UPS normally does pretty good.

On the Way
We’re sorry this package has experienced a sortation delay. The package has been rerouted to the correct destination.
Hammond, IN, United States
 
I ordered on the 19th also but got this message yesterday and the package appears to have never left Hammond, IN today yet? If it was the mail, I would totally have expected it but UPS normally does pretty good.

On the Way
We’re sorry this package has experienced a sortation delay. The package has been rerouted to the correct destination.
Hammond, IN, United States

Sorry to hear that.
Mine used UPS SurePost...
That means UPS picks it up and uses their ground network but then hands it off to US Post Office for the final delivery.
So my package had a UPS tracking number on it and USPS with a different tracking number.
The USPS tracker shows nothing till they received it into there network.
 
That's a shame Pep. The QR Code on my Reta 15mg kit works perfectly.

In checking dates I find that I ordered on the 16th of September, and, Janoshik performed the COA only 6 days earlier.

Seems likely to me that the filled vials are labelled with a blank prospective QR Code. This placeholder QR becomes a valid link once Janoshik posts his COA. It would be interesting to know how many days elapse before your proper COA appears 🙂
I would imagine it’s because it’s a brand new produced peptide. I saw him in his Telegram that it already went to haven’t Jano results. Should come any day next week. I have been participating in RNS group buys. Since the end of February, there has been multiple group buy that was super successful and everything tested well and it’s been very consistent. @dionysios if you contact Raven directly that she can explain and prove to you how the testing samples were damaged or compromised with the failed sterility test. She went ahead and sent it to a real lab and did a real sterility 71 test and it passed with flying colors.
 
@dionysios if you contact xxxxx directly that she can explain and prove to you how the testing samples were damaged or compromised with the failed sterility test. She went ahead and sent it to a real lab and did a real sterility 71 test and it passed with flying colors.
I've DM'd my response Queen.
 
Wow, I ordered the D11 after reading your post yesterday and it is the best $15.99 I have spent in recent time. Such a handy little gadget. Thank you!
I had been using my ancient brother p-touch, the niimbot is so cool and cheaper than a set of AA batteries for my old labeler. If you are stocking up on labels, ali express has them cheaper than amazon but w/o the instant gratification.

There is also a shortcut w/ the D11 to print a quick label with date and time. I use this for when I start a BAC water and even when I need to label something in the fridge.
 
Oh man. The learning never ends! I am waiting what may be an unusually long time for an Amo order, so I may give Nexa a try too. QSC is on my list, but I have not gone down the crypto rabbit hole just yet. Nexa offers 2 day shipping for a crazy low price.
QSC also accepts bank transfer and if you sign up for Wise it's pretty reasonable (like, 1% fee or so).
 
Curious what the sale price was for Nexaph? It’s sold out so I never saw it
 
I don’t have the time or inclination to run through the whole history of these people but it basically boils down to a track record of dishonesty. Every time they get caught in a lie they dig their hole deeper or try to blame someone else. These are indeed gb peptides being resold as domestic retail, which is fine as far as it goes if they just said that, but instead it’s being done in a swirling miasma of lies. And the really tragic part is they’re terrible liars so keep getting caught over and over.
 
I don’t have the time or inclination to run through the whole history of these people but it basically boils down to a track record of dishonesty. Every time they get caught in a lie they dig their hole deeper or try to blame someone else. These are indeed gb peptides being resold as domestic retail, which is fine as far as it goes if they just said that, but instead it’s being done in a swirling miasma of lies. And the really tragic part is they’re terrible liars so keep getting caught over and over.
are you talking about nexaph or qsc?
 
Order Update...

Ordered GHK-cu on Thursday Sept 19 @ 1:25pm
Shipped out that night....
Received package on Saturday Sept 21 @ 11:33am
Soooooo........ ~46 hours from completing order to delivery to Ohio 😍

View attachment 2101
Great packaging
Only negative at least until RS tests it is that the QR code takes you to their website and it says

Coming Soon
Testing Coming Soon
Please check back at another time

So don't care for the fact it directs to their website instead of a 3rd party independant site and also the fact that the test isn't already there...but these are minor complaints to me. Sure it will be even better moving forward.
👍
Been checking everyday like I said I would and as of today the QR code directs you to the janoshik test results
https://janoshik.com/tests/49372-GHKcu_50mg_IMV6KDZRAN2S

The results are showing 60-61mg. That's like a 20% overfill... Thank goodness for the test so I can calculate the product dosing based on a vial at 60mg instead of 50mg.
I don't like underfilled product but maybe they should be TESTING before shipping. This is excessive in my opinion. Makes me question them a little.
 
Been checking everyday like I said I would and as of today the QR code directs you to the janoshik test results
https://janoshik.com/tests/49372-GHKcu_50mg_IMV6KDZRAN2S

The results are showing 60-61mg. That's like a 20% overfill... Thank goodness for the test so I can calculate the product dosing based on a vial at 60mg instead of 50mg.
I don't like underfilled product but maybe they should be TESTING before shipping. This is excessive in my opinion. Makes me question them a little.
Makes me think they are generous to their customers and give good value for money Pep.

Selling a vial containing a 20 percent bonus over its ‘nominal’ or headline quantity does not happen by accident.

Very likely that Nexaph, or their supplier, has previously done in-house testing. They know with a fairly high degree of accuracy where the independent Janoshik COA will peg the peptide weight.

There are a couple of Chinese vendors known to this forum who have consistently and with high repeatability UNDERFILLED their vials by 4-5 percent for a long while.

It is gratifying to note that these same cheese-paring vendors have recently begun a very obvious effort to exactly fill or consistently overfill their vials. This is happening because we as informed consumers value higher quality and full measures.

We measure, publicly review, and then loudly comment upon the relative excellence of each vendor’s products. The smart vendors respond.

Twenty percent overfill is a VERY good thing.
 
Last edited:
I don’t have the time or inclination to run through the whole history of these people but it basically boils down to a track record of dishonesty. Every time they get caught in a lie they dig their hole deeper or try to blame someone else. These are indeed gb peptides being resold as domestic retail, which is fine as far as it goes if they just said that, but instead it’s being done in a swirling miasma of lies. And the really tragic part is they’re terrible liars so keep getting caught over and over.
 
Last edited:
Makes me think they are generous to their customers and give good value for money Pep.

Selling a vial containing a 20 percent bonus over its ‘nominal’ or headline quantity does not happen by accident.

Very likely that Nexaph, or their supplier, has previously done in-house testing. They know with a fairly high degree of accuracy where the independent Janoshik COA will peg the peptide weight.
I hear you...and I am happy for the extra.
And am very HAPPY they are testing the product to start with...just a little excessive for anyone who ordered and started using it BEFORE the testing results got posted online.
 
I hear you...and I am happy for the extra.
And am very HAPPY they are testing the product to start with...just a little excessive for anyone who ordered and started using it BEFORE the testing results got posted online.
I ordered GHK-CU from Pacific Peptides - wanted domestic with COA since trying for the 1st time before I go to a kit - and the 50mg vial held 61.12 mg too!
 
Last edited:
That explains why I am unable to find them @Tomes - I'm not a member of the PTDS.

I'm not in it either; have not been willing to go through the rigorous entry requirements, lol.

I imagine they would reject you out of hand anyway, D — for being, you know, an
incorrigible instigator.
 
I hear you...and I am happy for the extra.
And am very HAPPY they are testing the product to start with...just a little excessive for anyone who ordered and started using it BEFORE the testing results got posted online.
Perhaps you've not been around long enough to realize that almost all previous Group Buy purchases were made WITHOUT the benefit of COAs at all. Six weeks or 2 months AFTER everyone purchased their product the "group random testing" Janoshik results would trickle back to a fortunate few.

Meanwhile the tested batch was usually no longer available for purchase having been sold out. Doubtless quite a lot of members here have injected GB products long before the COAs became available. I know I have.

To have COA results available ONE WEEK after a GB/Promo and LINKED TO THE KIT is a near miracle in my view.
 
@dionysos caused a run on the market haha
FULL DISCLOSURE: Dionysos ran TO that market!
I got my order in earrrrly in the morning cause I know just how you PepTweeker girls ARE about SALES 😳.
Bloomingdale and Filene's events are just warmups for you guys 😁

🎶 Oh he's a smooth instigator... he's a smoooth INS TI GAAA TOR! ...
 
Last edited:
Perhaps you've not been around long enough to realize that almost all previous Group Buy purchases were made WITHOUT the benefit of COAs at all. Six weeks or 2 months AFTER everyone purchased their product the "group random testing" Janoshik results would trickle back to a fortunate few.

Meanwhile the tested batch was usually no longer available for purchase having been sold out. Doubtless quite a lot of members here have injected GB products long before the COAs became available. I know I have.

To have COA results available ONE WEEK after a GB/Promo and LINKED TO THE KIT is a near miracle in my view.

What can I say...Us Youngins are spoiled now adays. 😉

We want ALL our Experiment Grey Market Research Chemicals shipped at amazing speeds from our smiling friendly drug dealers with good COA's or we just aren't happy. 🤣

EVERYONE should be able to EAT their CAKE and HAVE it Too!
Don't you think?
 
Status
Not open for further replies.

Trending Topics

Latest Posts

Forum Statistics

Threads
3,267
Messages
53,666
Members
6,937
Latest member
Frankfab13
Back
Top Bottom