AmoPure Emerges From AmoPeptide Tirzwreck UPDATED*

[RedSkip]

Learned the # on top is a SKU number... So testing definitely.

Is the concern that there is a SKU number in general, therefore it’s made in mass batches? Being new, I’m not fully grasping why a SKU number is concerning.

 

[MingHenry]

I am new to grey too. Not sure SKU # is concerning or if the SKU # is a batch #, but testing a vial from a kit is prudent and smart. After all it's being injected.

 

[TheNorthernDude]

Just a small update for everyone who was interested in the group testing:
- I have been talking with Peptide-Test a number of times today, they are working on setting up a discord and a form so everyone who wants to can participate.

- I am hoping to get a thread started in Research Lab or Testing categories so that we can also just have a more centralized point of talking about details. If that doesn't happen, then I will set up a small thread in one of the public areas. I will make sure to go through this thread and invite everyone interested to the discord and the new thread.

- Peptide-Test has said that there will be 2 testing groups, 1 for 30mg, and 1 for 60mg.

- IF YOU WANT TO PARTICIPATE IN THIS GROUP, YOU ARE CONSENTING FOR THESE REPORTS TO BE PUBLIC ON GLP-1 FORUMS, YOU MAY ALSO SHARE THIS REPORT IF YOU ARE IN THE GROUP WITH OTHER AREAS, BUT PLEASE USE DISCRETION, WE DON'T WANT TO ATTRACT A TON OF ATTENTION FROM MAYBE BIG PHARMA/ELI.

- If there are a LOT of people sending vials PER GROUP (5+), there will be a small charge added overall for the logistical stuff they will have to handle everything.

- Sterility testing is an option we can add per group, the upcharge is $250. I'm unsure IF the group wants it if we would need to do more than 1 group with it in my view. I'll be conducting a poll per group, this is a group buy, not a "let's tag along with Cndmk's idea" buy. Sterility takes up to 3 weeks to perform, so it will extend the testing timeline also.

- The goal is still 8/22 to get all participants in the group, so we can get a final cost per vial per group.

- Week of 8/25 (Deadline lets just say 8/30 to get it shipped out). I'm asking for them to wait until all accounted for vials that have shipping information are in.

Even though this kind of blew up, and I was grossly under-prepared for the interest, I'm very happy to be a medium for people to get some reasonably costed testing of their product, and I'm hoping that this concept may have a future with other testing facilities for validation. I'm also hoping it might be a marketing incentive for other vendors of peptides to get discounts, or financially support these group testing efforts (but that might be a fever dream).

I’d be willing to send in one of my T30, should be here in 2-3 days. Following to see what the next step is.

 

[GLP69]

got t60 in yesterday, no number on the case or vials.

 

[zpped]

Amopure seems to have always tested well for purity. They used to have a problem with quantity but it appears that may been solved with the new vacuum vials. The best thing they could do next to improve is batch numbers.

 

[tul9033]

Got my T30 yesterday. Vial tops were blue and had 158019 printed on the top.

 

[KYRivianMan]

I am hoping to see you all’s reports on the Amopure Tirz and Reta. I am hearing sterility problems may be present. Several people are saying that it stings badly and leaving bruising. Using the same method and bac water as always. Has anyone had this issue?

 

[geoguy78]

I am hoping to see you all’s reports on the Amopure Tirz and Reta. I am hearing sterility problems may be present. Several people are saying that it stings badly and leaving bruising. Using the same method and bac water as always. Has anyone had this issue?

Not what I'm hoping to hear. Been leaning heavily towards Amopure but going to hold off until there's more clarity on this.

 

[MingHenry]

This

I am hoping to see you all’s reports on the Amopure Tirz and Reta. I am hearing sterility problems may be present. Several people are saying that it stings badly and leaving bruising. Using the same method and bac water as always. Has anyone had this issue?

This doesn't make me happy. It would be great if anyone who has recently bought tirz from Amo and is currently using it would weigh in. I bought but will part of group test.

 

[icebear]

I am hoping to see you all’s reports on the Amopure Tirz and Reta. I am hearing sterility problems may be present. Several people are saying that it stings badly and leaving bruising. Using the same method and bac water as always. Has anyone had this issue?

currently using their R10. no stings or bruising. there are several factors that could cause the sharp pain that have nothing to do with the dose/solution. been working great and fast for me so far

 

[Drexeldragon216]

Where are you hearing about the potential sterility problems? Certainly hoping that is not the case.

 

[MingHenry]

currently using their R10. no stings or bruising. there are several factors that could cause the sharp pain that have nothing to do with the dose/solution. been working great and fast for me so far

Hi @icebear wondering what those several favors might be?

 

[meowTime]

currently using their R10. no stings or bruising. there are several factors that could cause the sharp pain that have nothing to do with the dose/solution. been working great and fast for me so far

Yes, one time I must have hit a blood vessel because it was the only time I had a sting and it formed a bruise the next day that lasted for over a week. It was pharmacy compounded as well.

 

[MingHenry]

Yes, one time I must have hit a blood vessel because it was the only time I had a sting and it formed a bruise the next day that lasted for over a week. It was pharmacy compounded as well.

So user error not compound problem, in that case!

 

[Drey77]

Yes, one time I must have hit a blood vessel because it was the only time I had a sting and it formed a bruise the next day that lasted for over a week. It was pharmacy compounded as well.

Same, I’m still using up my Hallendale compound Tirz and my last shot stung after pretty bad and also was swollen/red for a few days, yet my husband (we share the same vial) had no reaction. Also before he has bruised while I’ve never bruised. Also depending on where I am injecting my skin has had so many different reactions. I will be testing Amo Tirz when I get it regardless but I’m not to scared off by some stinging and bruising since I’ve been already experiencing that with what compound Tirz.

 

[badjuju]

Learned the # on top is a SKU number... So testing definitely.

My order was delivered today and I don’t see any numbers. The sticker says:

“T30 > 99%”
“Research Use Only”
“Not For Human Consumption”

Am I missing something??

 

[MingHenry]

My order was delivered today and I don’t see any numbers. The sticker says:

“T30 > 99%”
“Research Use Only”
“Not For Human Consumption”

Am I missing something??

I had the # only on one box. No idea what it means.

 

[meowTime]

My order was delivered today and I don’t see any numbers. The sticker says:

“T30 > 99%”
“Research Use Only”
“Not For Human Consumption”

Am I missing something??

Mine came like that too. No numbers on stealth packaging either.

 

[Drexeldragon216]

My order was delivered today and I don’t see any numbers. The sticker says:

“T30 > 99%”
“Research Use Only”
“Not For Human Consumption”

Am I missing something??

No, I have received 2 different orders (about two weeks apart) and they are labeled the exact same way, both with blue tops. One came via UPS and was smooth and packaged well, the second came via USPS and was in a flat rate box that was not sealed well. I am surprised it didn’t end up just flying out of the box since there was a good size hole in one corner.

 

[TheNorthernDude]

My order was delivered today and I don’t see any numbers. The sticker says:

“T30 > 99%”
“Research Use Only”
“Not For Human Consumption”

Am I missing something??

Got mine today - well packed, vials intact, all cakes still together, only the same things you posted - no ID number of any kind. Will be interested to see how it tests

 

[GLP69]

I am hoping to see you all’s reports on the Amopure Tirz and Reta. I am hearing sterility problems may be present. Several people are saying that it stings badly and leaving bruising. Using the same method and bac water as always. Has anyone had this issue?

No issues with L60 with my RS. Where are you hearing about sterility issues?

 

[fetefille]

I am hoping to see you all’s reports on the Amopure Tirz and Reta. I am hearing sterility problems may be present. Several people are saying that it stings badly and leaving bruising. Using the same method and bac water as always. Has anyone had this issue?

I bought T30 from them mid July, no problems with bruising or stinging

 

[dionysos]

Much of this agita is competitive FUD thrown around by competitors.

People who "report" sterility and other issues without specifics or links to their sources are not helping anyone.

Please challenge anyone who has these issues to produce the COAs or Sterility tests which document the issues so they can be examined for validity. If they are true then show the lab tests which prove them and appropriate actions can be taken.

If the documents cannot be produced then we can all safely ignore these hysteric claims.

 

[Drexeldragon216]

Much of this agita is competitive FUD thrown around by competitors.

People who "report" sterility and other issues without specifics or links to their sources are not helping anyone.

Please challenge anyone who has these issues to produce the COAs or Sterility tests which document the issues so they can be examined for validity. If they are true then show the lab tests which prove them and appropriate actions can be taken.

If the documents cannot be produced then we can all safely ignore these hysteric claims.

Agreed. Throwing around claims without anything to back them up doesn’t help anyone.

 

[Dee X]

I am hoping to see you all’s reports on the Amopure Tirz and Reta. I am hearing sterility problems may be present. Several people are saying that it stings badly and leaving bruising. Using the same method and bac water as always. Has anyone had this issue?

Zero stinging from Cagri, Tirz, and Reta from AMO for me.

 

[AnnSolo771]

My kit arrived today, first time ever ordering, should the peptides be solid chunks as seen in the attached pics. ? I assumed they were a fine powder, but as you see they are chunks / big pieces kind of stuck together. should i shake it to break it up or let it be and throw in the freezer? (i am going to pick one for testing soon)

View attachment 1306View attachment 1307

Today just received R15 too from AmP -- looks the same. Broken cakes are fine. Read Janoshik's info re product on the Peppy's site. I will get a vial tested for quantity, purity and sterility by end next week. I am anticipating it will be super good. will report back here re test info.

 

[kraelik]

My 2xL60s arrived today. Just took my first shot of 5mg, so we'll see how I'm feeling tomorrow. 😎

 

[AnnSolo771]

My order was delivered today and I don’t see any numbers. The sticker says:

“T30 > 99%”
“Research Use Only”
“Not For Human Consumption”

Am I missing something??

no batch# on my 2 R kits either, blue tops with % sticker and name of product is all. it's the testing that matters most. get it tested.

 

[nurseratchit]

I also received my T30 today. Blue caps, no batch #. Cakes are solid. Packaging and vials looks very similar to Skye’s. 🤔

 

[roake]

Is there anyway to safely divide into smaller portion/dosage if I buy the L60 sizes?